Home › Engine / Hybrid System › 1KD-FTV ENGINE CONTROL › ECD SYSTEM
NM33K0E _51 Engine / Hybrid System _043755 1KD-FTV ENGINE CONTROL _0204738 ECD SYSTEM CO CONTROL F

1KD-FTV ENGINE CONTROL  ECD SYSTEM  CONTROL  GLOW PLUG CONTROL  


FUNCTION


a.

The ECM controls the length of time for which the current is applied to the glow plug relay assembly when the engine starts in accordance with engine coolant temperature to control the length of time for which the current is applied to the glow plug assemblies.


b.

When the ignition switch is turned from off to ON*1 or the engine switch is turned on (START)*2, the ECM operates the glow plug relay assembly to heat the glow plug assemblies rapidly. At that moment, the glow indicator light in the combination meter assembly is illuminated to inform the driver that the glow plug assemblies are being heated.

*1: Models without smart entry and start system.

*2: Models with smart entry and start system.



c.

When the engine starts and the starter signal is off, after-glow control is conducted. When the temperature of the glow plug assembly reaches a predetermined level during after-glow control, it is maintained at a nearly constant level using the self-temperature-controlling function of the glow plug assembly.

W127858E01
5.104,2.5 5.302,2.5 5.302,2.5 5.406,1.833 true 5.667,0.208 6.583,0.625 0.917,0.417 10 false Ignition Signal 5.667,0.594 6.583,1.01 0.917,0.417 10 false Starter Signal 5.677,0.948 7.031,1.51 1.354,0.563 10 false Engine Coolant Temp. Sensor 5.667,1.615 6.833,2.281 1.167,0.667 10 false Combination Meter Assembly 5.625,2.365 6.979,2.719 1.354,0.354 10 false - Glow Indicator Light 4.594,0.969 5.01,1.406 0.417,0.438 10 false ECM 4.281,2.406 5.125,2.75 0.844,0.344 10 false CAN (V Bus) 3,0.635 3.51,0.979 0.51,0.344 10 false Battery 1.948,1.198 3.635,1.573 1.688,0.375 10 false Glow Plug Relay Assembly 0.26,2.25 1.583,2.635 1.323,0.385 10 false Glow Plug Assembly