Home › Engine / Hybrid System › 2TR-FE ENGINE MECHANICAL › ENGINE UNIT
NM33K0E _51 Engine / Hybrid System _045490 2TR-FE ENGINE MECHANICAL _0213940 ENGINE UNIT DE DETAILS F

2TR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CYLINDER BLOCK  


CONSTRUCTION


a.

The cylinder block is made of cast iron, and the rib shape of each part has been optimized to increase rigidity while reducing vibration and noise.


b.

By setting the cross-hatch treatment angle of the cylinder bore to 30°, more oil can be retained on the bore wall resulting in the reduction of friction.


c.

A water passage is provided between the cylinder bores. By allowing the engine coolant to flow between the cylinder bores, this construction keeps the temperature of the cylinder walls uniform.


d.

The crankshaft bearing caps are tightened using 2 plastic region tightening bolts for each journal.

W126176C01
1.365,0.844 1.094,0.479 true 6.031,2.896 5.729,3.198 true 5.25,0.542 5.417,1.177 true 0.969,0.354 1.281,0.51 0.313,0.156 10 false *1 6.042,2.75 6.354,2.906 0.313,0.156 10 false *4 5.156,0.354 5.49,0.594 0.333,0.24 10 false *a 4.563,2.531 4.875,2.688 0.313,0.156 10 false *b 0.698,3.438 1.01,3.594 0.313,0.156 10 false *2 0.708,4.01 1.021,4.167 0.313,0.156 10 false *3 6.302,3.99 6.635,4.229 0.333,0.24 10 false 30°
*1 Cylinder Block Sub-assembly *2 Crankshaft Bearing Cap
*3 Plastic Region Tightening Bolt *4 Cylinder Bore
*a Water Passage *b Cross-hatch Treatment Angle