Home › Engine / Hybrid System › 2TR-FE ENGINE MECHANICAL › ENGINE UNIT
NM33K0E _51 Engine / Hybrid System _045490 2TR-FE ENGINE MECHANICAL _0213940 ENGINE UNIT DE DETAILS F

2TR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  BALANCE SHAFT  


CONSTRUCTION


a.

For in-line 4-cylinder engines, the main cause of vibration is the imbalanced inertial forces of reciprocating parts such as the pistons and connecting rods. Engine vibration has been reduced by using 2 balance shafts to cancel the imbalanced inertial forces, thereby reducing engine noise (booming noise).


b.

The 2 balance shafts are built into the cylinder block. Using a chain, sprockets and gears, both balance shafts rotate at twice the speed of the crankshaft, with each balance shaft rotating in the opposite direction of the other.


c.

The chain tensioner uses a spring and oil pressure to maintain proper chain tension at all times. A ratchet type non-return mechanism is also included.


d.

The chain tensioner has 2 oil holes that spray engine oil for lubricating the balance shaft chain. Furthermore, they lubricate the timing chain that drives the camshaft.

W126181C01
2.563,0.927 2.125,0.813 true 0.688,0.896 0.948,0.844 true 0.719,0.479 1.042,0.625 true 1.073,0.229 1.177,0.51 true 5.823,1.969 6.365,0.396 6.365,0.396 5.094,1.646 true 2.594,2.333 2.271,2.563 true 2.604,2.854 1.948,2.729 true 1.042,2.302 0.615,2.146 true 1.042,2.76 0.677,2.917 true 1.563,3.302 1.198,3.583 true 2.583,3.573 1.969,3.177 true 1.24,1.125 1.333,1.385 1.333,1.385 1.406,1.125 true 0.958,0.063 1.271,0.219 0.313,0.156 10 false *1 0.563,0.354 0.875,0.51 0.313,0.156 10 false *2 0.521,0.792 0.833,0.948 0.313,0.156 10 false *3 2.594,0.854 2.906,1.01 0.313,0.156 10 false *4 0.469,2.021 0.781,2.177 0.313,0.156 10 false *5 0.531,2.833 0.844,2.99 0.313,0.156 10 false *6 1.063,3.479 1.375,3.635 0.313,0.156 10 false *7 2.615,3.49 2.927,3.646 0.313,0.156 10 false *8 2.635,2.76 2.948,2.917 0.313,0.156 10 false *9 2.625,2.219 3.094,2.375 0.469,0.156 10 false *10 6.302,0.208 6.802,0.438 0.5,0.229 10 false *11 1.26,1.365 1.521,1.563 0.26,0.198 10 false *a
*1 Cam Spring *2 Cam
*3 Plunger *4 Spring
*5 Balance Shaft Drive Gear Sub-assembly *6 Balance Shaft Driven Gear
*7 No. 2 Crankshaft Timing Sprocket *8 Balance Shaft Chain (No. 2 Chain Sub-assembly)
*9 No. 2 Chain Tensioner Assembly *10 Balance Shaft Timing Sprocket
*11 Balance Shaft - -
V100136

Engine Oil - -




OPERATION


a.

In the in-line 4-cylinder engine, the crankshaft angles for the No. 1 and No. 4 cylinders are at the exact opposite (180°) positions of the No. 2 and No. 3 cylinders. Therefore, the inertial forces of the pistons and connecting rods of the former and latter 2 cylinders almost cancel each other out. However, because the position at which the piston reaches its maximum speed is located toward the top dead center from the center of the stroke, the upward inertial force is greater than the downward inertial force. This unbalanced secondary inertial force is generated twice for each rotation of the crankshaft.

W100394E08
3.094,1.875 2.813,1.656 2.813,1.656 2.667,1.656 true 3.198,1.563 3.094,1.063 3.094,1.063 2.865,1.063 true 4.094,1.865 4.385,1.698 4.385,1.698 4.563,1.698 true 3.594,1.323 3.958,1.01 3.958,1.01 4.146,1.01 true 3.594,0.635 3.781,0.458 3.781,0.458 3.927,0.458 true 3.594,0.292 3.76,0.135 3.76,0.135 3.917,0.135 true 3.958,0.052 5.375,0.333 1.417,0.281 10 false Top Dead Center 3.969,0.365 5.385,0.646 1.417,0.281 10 false Point of Max. Speed 4.167,0.927 5.583,1.208 1.417,0.281 10 false Bottom Dead Center 4.615,1.604 6.031,1.885 1.417,0.281 10 false Point of Max. Speed 1.365,1.552 2.781,1.833 1.417,0.281 10 false Point of Max. Speed 2.635,0.979 2.896,1.26 0.26,0.281 10 false 90°

Inertial Force Generated by 4 In-line Cylinders
W100395E16
2.219,0.948 2.406,0.948 2.406,0.948 2.635,1.448 true 2.646,1.927 2.385,1.677 2.385,1.677 2.26,1.677 true 3.583,1.5 3.813,0.927 3.813,0.927 3.948,0.927 true 3.844,1.938 3.844,1.365 3.844,1.365 3.979,1.365 true 3.521,1.313 3.333,0.99 3.333,0.99 3.208,0.99 true 3.25,1.917 3.25,1.292 3.25,1.292 3.094,1.292 true 4.99,1.938 4.99,1.365 4.99,1.365 5.156,1.365 true 2.698,2.635 2.396,2.958 2.396,2.958 2.229,2.958 true 0.573,0.833 2.177,1.438 1.604,0.604 10 false Inertial Force of No. 2 and No. 3 Cylinders 0.365,1.563 2.198,2.521 1.833,0.958 10 false Combined Inertial Force of All Cylinders (Unbalanced Secondary Inertial Force) 0.552,2.844 2.156,3.281 1.604,0.438 10 false Inertial Force of No. 1 and No. 4 Cylinders 2.5,2.25 2.854,2.427 0.354,0.177 10 false -180° 3.563,2.25 3.719,2.427 0.156,0.177 10 false 0° 4.292,2.25 4.594,2.427 0.302,0.177 10 false 180° 2.813,1.208 3.083,1.385 0.271,0.177 10 false -90° 4.01,1.281 4.24,1.458 0.229,0.177 10 false 90° 5.198,1.271 5.5,1.448 0.302,0.177 10 false 270° 4.01,0.833 6.542,1.24 2.531,0.406 10 false Inertial Force that cannot be Canceled 2.823,0.875 3.198,1.052 0.375,0.177 10 false Force 5.375,2.073 6.458,2.469 1.083,0.396 10 false Crankshaft Angle


b.

To cancel the unbalanced secondary inertial force, 2 balance shafts are rotated twice for each rotation of the crankshaft and generate inertial force in the opposite direction. Also, in order to cancel the inertial force generated by the balance shaft itself, the balance shaft actually consists of 2 shafts rotating in opposite directions.

Mass Direction of Balance Shaft at Crankshaft Angle
W100396E09
2.823,1.125 2.594,0.833 2.594,0.833 2.448,0.833 true 3.458,1.115 3.25,0.5 3.25,0.5 3.115,0.5 true 4.115,1.104 3.906,0.5 3.906,0.5 3.771,0.5 true 4.76,1.104 4.552,0.5 4.552,0.5 4.417,0.5 true 4.917,0.802 5.021,0.479 5.021,0.479 5.156,0.479 true 5.302,2.854 5.49,2.052 5.49,2.052 5.698,2.052 true 5.146,3.031 5.719,3.031 true 4.948,1.406 5.094,1.625 5.094,1.625 5.198,1.625 true 2.323,0.75 2.479,0.927 0.156,0.177 10 false 0° 3.51,0.417 3.813,0.594 0.302,0.177 10 false 180° 2.948,0.365 3.177,0.542 0.229,0.177 10 false 90° 4.146,0.406 4.448,0.583 0.302,0.177 10 false 270° 2.719,1.177 2.875,1.354 0.156,0.177 10 false A 3.083,1.219 3.24,1.396 0.156,0.177 10 false B 3.417,1.198 3.573,1.375 0.156,0.177 10 false C 3.771,1.229 3.927,1.406 0.156,0.177 10 false D 4.083,1.188 4.24,1.365 0.156,0.177 10 false E 5.219,0.385 7.146,0.76 1.927,0.375 10 false Inertial Force of Balancer 5.25,1.042 6.865,1.323 1.615,0.281 10 false Crankshaft Angle 5.26,1.531 7.01,1.896 1.75,0.365 10 false Secondary Inertial Force 5.75,1.948 6.854,2.615 1.104,0.667 10 false Mass Direction of Balance Shaft 5.792,2.896 6.792,3.583 1,0.688 10 false Inertial Force of Balancer