Home › Engine / Hybrid System › 2TR-FE ENGINE MECHANICAL › ENGINE UNIT
NM33K0E _51 Engine / Hybrid System _045490 2TR-FE ENGINE MECHANICAL _0213940 ENGINE UNIT GE GENERAL F

2TR-FE ENGINE MECHANICAL  ENGINE UNIT  GENERAL  GENERAL  


OUTLINE


a.

The 2TR-FE engine is an in-line 4-cylinder, 2.7-liter, 16-valve DOHC engine.


b.

On this engine, the Electronic Throttle Control System-intelligent (ETCS-i), Dual Variable Valve Timing-intelligent (Dual VVT-i) and air injection system* are used. These control functions have been optimized to further improve engine performance and fuel economy, and reduce exhaust emissions.

*: Models with air injection system




SPECIFICATION


*1: Emission regulations differ by country and region.

*2: Weight shows the figure with oil and coolant fully filled.

*3: Except Models for Argentina

*4: Models for Argentina

No. of Cyls. and Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve DOHC, Chain Drive (with Dual VVT-i)
Combustion Chamber Pentroof Type
Manifolds Cross-flow
Fuel System Sequential Multiport Fuel Injection (SFI)
Ignition System Direct Ignition System (DIS)
Displacement 2694 cm3 (164.4 cu. in.)
Bore x Stroke 95.0 mm x 95.0 mm (3.74 in. x 3.74 in.)
Compression Ratio 10.2 : 1
Max. Output [SAE-NET] 122 kW @ 5200 rpm
Max. Torque [SAE-NET] 245 N*m @ 4000 rpm
Valve Timing Intake Open 28° BTDC to -8° BTDC
Closed 36° ABDC to 72° ABDC
Exhaust Open 53° BBDC to 8° BBDC
Closed -1° ATDC to 44° ATDC
Spark Plug Manufacturer DENSO
Type FK20HR-A8
Plug Gap 0.7 mm to 0.8 mm (0.0276 in. to 0.0315 in.)
Firing Order 1 - 3 - 4 - 2
Research Octane Number 91 (Octane Rating 87) or higher*3
95 (Octane Rating 91) or higher*4
Emission Regulation*1 EURO 2
EURO 4
EURO 5
Engine Service Mass (Reference)*2 161 kg (354.9 lb)

HINT:

Toyota allows the use of ethanol blended gasoline where the ethanol content is up to 10%. Make sure that the ethanol blended gasoline to be used has a Research Octane Number that follows the above.



MAIN FEATURES


a.

This engine has been able to achieve the following performance through the use of the items listed below:

A: High performance and fuel economy

B: Low noise and vibration

C: Lightweight and compact design

D: Good serviceability

E: Clean emissions

Item A B C D E
Engine Proper A cylinder head cover made of plastic is used. - ○ ○ - -
A taper squish shape is used for the combustion chamber. ○ - - - ○
2 balance shafts are used. - ○ - - -
The piston skirt is coated with resin. ○ ○ - - ○
A No. 1 oil pan made of aluminum alloy is used. ○ ○ ○ - -
Valve Mechanism A valve mechanism, in which the camshafts actuate the roller rocker arms in order to open and close the valves, is used. ○ - - - ○
A Dual Variable Valve Timing-intelligent (Dual VVT-i) system is used. ○ - - - ○
Valve lash adjusters are used. ○ ○ - ○ ○
A timing chain and chain tensioner are used. ○ - ○ - -
Intake and Exhaust System An intake manifold made of plastic is used. - - ○ - -
A link-less type throttle body is used. - - ○ ○ -
A stainless steel exhaust manifold is used. - - ○ - -
Three-Way Catalytic Converters (TWCs) are used. - - - - ○
Fuel System Long nozzle, 12-hole type fuel injectors are used to improve the atomization of fuel. ○ - - - ○
Quick connectors are used to connect the fuel hose with the fuel pipe. - - - ○ -
Ignition System Long-reach type spark plugs are used. ○ - - - -
A Direct Ignition System (DIS) makes ignition timing adjustment unnecessary. ○ - - ○ ○
Serpentine Belt Drive System A serpentine belt drive system is used. - - ○ ○ -
Engine Control System An Electronic Throttle Control System-intelligent (ETCS-i) is used. ○ - - - ○
A flat type knock sensor is used. ○ - - - -
A no-contact sensor is used in the throttle position sensor and accelerator pedal position sensor. ○ - - - -
The use of an air fuel ratio sensor allows for precise control. - - - - ○
An air injection system is used.* - - - - ○

HINT:

○: Available

-: Not available

*: Models with air injection system