Home › Engine / Hybrid System › 1GR-FE ENGINE MECHANICAL › ENGINE UNIT
NM33K0E _51 Engine / Hybrid System _045970 1GR-FE ENGINE MECHANICAL _0217242 ENGINE UNIT DE DETAILS F

1GR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  VVT-i CONTROLLER  


CONSTRUCTION


a.

VVT-i controllers consist of the housing driven from the timing chain and the vane coupled with the intake camshaft.


b.

The oil pressure sent from the advance or retard side path at the intake camshaft causes rotation in the VVT-i controller vane circumferential direction to vary the intake valve timing continuously.


c.

When the engine is stopped, the intake camshaft will be in the most retarded state to ensure startability.


d.

When hydraulic pressure is not applied to the VVT-i controller immediately after the engine has started, the lock pin locks the movement of the VVT-i controller to prevent a knocking noise. Thereafter, when hydraulic pressure is applied to the VVT-i controller, the lock pin is released.

W126370C01
6.208,2.021 5.99,1.708 true 5.073,2.656 4.927,2.396 true 4.292,2.844 3.823,1.958 true 3.792,2.906 3.813,2.51 true 2.625,3.156 2.75,2.854 true 1.052,2.479 1.333,2.573 true 0.896,2.354 1.208,2.51 0.313,0.156 10 false *1 2.51,3.156 2.823,3.313 0.313,0.156 10 false *2 3.667,2.927 4.198,3.167 0.531,0.24 10 false *3 (*C) 4.292,2.844 4.604,3 0.313,0.156 10 false *4 5.031,2.656 5.344,2.813 0.313,0.156 10 false *5 6.208,2.021 6.521,2.177 0.313,0.156 10 false *6 1.781,1.198 2.094,1.354 0.313,0.156 10 false *a 2.781,1.177 3.094,1.333 0.313,0.156 10 false *b 0,0 0.156,0.156 0.156,0.156 10 false -
*1 Timing Rotor *2 Outer Housing
*3 Vane *4 Lock Pin
*5 Timing Chain Sprocket *6 Intake Camshaft
*a Engine Operating *b Engine Stopped
*c Coupled to Intake Camshaft - -
V100135

Oil Pressure - -




OPERATION


a.

Advance

i.

When the cam timing oil control valves are positioned as illustrated below by the advance signals from the ECM, the resultant oil pressure is applied to the timing advance side vane chamber to rotate the camshaft in the timing advance direction:

W126371C01
5.729,2.552 5.906,2.292 true 1.656,2.333 1.521,1.969 true 0.729,1.354 1,1.5 true 0.563,1.219 0.875,1.375 0.313,0.156 10 false *1 5.625,2.563 5.938,2.719 0.313,0.156 10 false *2 6.375,1.333 6.688,1.49 0.313,0.156 10 false *3 1.635,2.365 1.948,2.521 0.313,0.156 10 false *a 5.219,2.573 5.531,2.729 0.313,0.156 10 false *b 5.438,2.563 5.75,2.719 0.313,0.156 10 false *c
*1 Vane *2 Cam Timing Oil Control Valve Assembly
*3 ECM - -
*a Advance Side Vane Chamber *b In
*c Drain - -
V100135

Oil Pressure
V100136

Rotation Direction




b.

Retard

i.

When the cam timing oil control valves are positioned as illustrated below by the retard signals from the ECM, the resultant oil pressure is applied to the timing retard side vane chamber to rotate the camshaft in the timing retard direction:

W126372C01
5.875,2.563 5.99,2.271 true 1.583,2.406 1.417,2.104 true 0.76,1.719 1.063,1.719 true 0.573,1.604 0.885,1.76 0.313,0.156 10 false *1 5.771,2.552 6.083,2.708 0.313,0.156 10 false *2 6.375,1.365 6.688,1.521 0.313,0.156 10 false *3 1.552,2.396 1.865,2.552 0.313,0.156 10 false *a 5.219,2.583 5.531,2.74 0.313,0.156 10 false *b 5.448,2.573 5.76,2.729 0.313,0.156 10 false *c
*1 Vane *2 Cam Timing Oil Control Valve Assembly
*3 ECM - -
*a Advance Side Vane Chamber *b Drain
*c In - -
V100135

Oil Pressure
V100136

Rotation Direction




c.

Hold

i.

After reaching the target timing, the engine valve timing is maintained by keeping the cam timing oil control valve in the neutral position unless the engine operating conditions change. This maintains the engine valve timing at the desired target position by preventing the engine oil from running out of the oil control valve.