Home › Engine / Hybrid System › 1GR-FE ENGINE MECHANICAL › ENGINE UNIT
NM33K0E _51 Engine / Hybrid System _045970 1GR-FE ENGINE MECHANICAL _0217242 ENGINE UNIT DE DETAILS F

1GR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CYLINDER HEAD COVER  


CONSTRUCTION


a.

Lightweight yet high-strength aluminum cylinder head covers are used.


b.

An oil filler housing has been provided on the left bank cylinder head cover to improve the serviceability when filling the engine oil.


c.

The cylinder head cover gasket and a gasket to seal the ignition coil circumference have been integrated to reduce the number of parts.


d.

Baffle plates are provided inside the cylinder head cover to reduce the consumption of engine oil through blow-by gas. Each baffle plate is welded onto a cylinder head cover, and cannot be removed.

W126356C01
5.781,1.729 5.302,1.302 true 6.417,1.5 6.146,1.313 true 5.458,2.917 5.219,2.646 true 0.833,2.073 1.229,2.156 true 0.833,0.771 1.042,1.156 true 1.083,3.125 0.729,3.333 true 4.219,3.948 4.406,4.219 true 0.719,0.563 1.031,0.719 0.313,0.156 10 false *1 0.688,1.938 1,2.094 0.313,0.156 10 false *2 0.573,3.229 0.885,3.385 0.313,0.156 10 false *3 4.375,4.219 4.688,4.375 0.313,0.156 10 false *4 5.458,2.875 5.771,3.031 0.313,0.156 10 false *5 5.823,1.656 6.135,1.813 0.313,0.156 10 false *6 6.458,1.417 6.771,1.573 0.313,0.156 10 false *7
*1 Cylinder Head Cover Sub-assembly *2 Ventilation Baffle Plate
*3 Cylinder Head Cover Gasket *4 No. 2 Cylinder Head Cover Gasket
*5 No. 2 Ventilation Baffle Plate *6 Oil Filler Housing
*7 Cylinder Head Cover Sub-assembly LH - -