Home › Engine / Hybrid System › 1GR-FE ENGINE MECHANICAL › ENGINE UNIT
NM33K0E _51 Engine / Hybrid System _045970 1GR-FE ENGINE MECHANICAL _0217242 ENGINE UNIT DE DETAILS F

1GR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CYLINDER BLOCK  


CONSTRUCTION


a.

The cylinder block is made of aluminum alloy.


b.

The cylinder block has a bank angle of 60°, a bank offset of 36.6 mm (1.441 in.) and a bore pitch of 105.5 mm (4.15 in.), resulting in a compact block in its length and width even for its displacement.


c.

The installation bosses of the 2 knock control sensors are located on the inner side of the left and right banks.

W126360C01
1.406,2.51 1.927,2.688 true 3.531,5.146 5.792,5.208 5.792,5.208 3.792,5.667 true 1.24,2.375 1.552,2.531 0.313,0.156 10 false *1 5.854,5.115 6.167,5.271 0.313,0.156 10 false *a 1.875,7.021 2.521,7.427 0.646,0.406 10 false 36.6 mm 3.115,7.448 3.76,7.854 0.646,0.406 10 false 105.5 mm 2.521,0.542 2.833,0.698 0.313,0.156 10 false 60°
*1 Cylinder Block Sub-assembly - -
*a Knock Control Sensor Boss - -



d.

The liners are the spiny-type which have been manufactured so that their casting exteriors form large irregular surfaces in order to enhance the adhesion between the liners and the aluminum cylinder block. The enhanced adhesion helps heat dissipation, resulting in a lower overall temperature and heat deformation of the cylinder bores.


e.

A water passage is provided between the cylinder bores. By allowing the engine coolant to flow between the cylinder bores, this construction keeps the temperature of the cylinder walls uniform.

W126361C01
1.448,2.344 1.906,2.542 true 1.385,4.271 1.677,4.469 true 1.323,4.948 1.625,4.802 true 5.573,3.51 5.26,4.5 true 1.302,2.198 1.615,2.354 0.313,0.156 10 false *1 1.24,4.125 1.552,4.281 0.313,0.156 10 false *2 1.156,4.854 1.469,5.01 0.313,0.156 10 false *3 0.979,3.76 1.292,3.917 0.313,0.156 10 false *a 5.531,3.281 5.844,3.438 0.313,0.156 10 false *b
*1 Cylinder Block Sub-assembly *2 Liner
*3 Irregularly Shaped Outer Casting Surface of Liner - -
*a A - A Cross Section *b Water Passage