Home › Engine / Hybrid System › 1GD-FTV EMISSION CONTROL › EMISSION CONTROL SYSTEM
NM33K0E _51 Engine / Hybrid System _046128 1GD-FTV EMISSION CONTROL _0217554 EMISSION CONTROL SYSTEM CO CONTROL F

1GD-FTV EMISSION CONTROL  EMISSION CONTROL SYSTEM  CONTROL  EMISSION CONTROL  


FUNCTION OF MAIN COMPONENTS


a.

The main components of the emission control system are as follows:

Component Function

*: Models with catalyst support control

ECM Controls the emission control system based on signals from each sensor.
Electric EGR Control Valve Assembly Actuated by the ECM, this valve controls the flow rate of EGR gas.
EGR Valve Position Sensor (Built into Electric EGR Control Valve Assembly) Detects the EGR valve position.
Diesel Throttle Valve Actuated by the ECM, this valve controls the flow rate of intake air.
No. 1 EGR Cooler Cools EGR gas.
No. 2 EGR Valve Assembly Switches the flow passage of EGR gas in 2 stages.
Differential Pressure Sensor* Monitors the differential pressure before and after the DPF to detect whether the DPF is clogged.
Exhaust Fuel Addition Injector Assembly* Injects fuel into the exhaust manifold according to signals from the ECM.
Exhaust Gas Temperature Sensor* Detects the exhaust gas temperature.
No. 2Exhaust Gas Temperature Sensor*
No. 3 Exhaust Gas Temperature Sensor*
Air Fuel Ratio Sensor* Detects the oxygen concentration in exhaust gas.



FUNCTION


a.

The main function of the emission control system is as follow:

Function Outline

*: Models with catalyst support control

EGR Control This system is designed to help reduce and control NOx formation due to a reduction of peak temperature in the engine combustion chamber, which is accomplished by the introduction of an amount of inert gas into the intake manifold.
Catalyst Support Control* Determines the DPF catalyst conditions based on various signals, controls the injector assembly and exhaust fuel addition injector assembly, and controls the DPF catalyst conditions.