Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › MONITOR SYSTEM
NM33K0E _56 Audio / Visual / Telematics _047964 PARK ASSIST / MONITORING _0227369 MONITOR SYSTEM CO CONTROL F

PARK ASSIST / MONITORING  MONITOR SYSTEM  CONTROL  MONITOR CONTROL  


FUNCTION OF MAIN COMPONENTS


a.

The components have the following functions:

Component Function

*1: Models with navigation system

*2: Models with display audio system (base grade) or display audio system

*3: Models with automatic toransmission

*4: Models with manual toransmission

Rear Television Camera Assembly Transmits a video signal of the area behind the vehicle to the radio and display receiver assembly.
Navigation Receiver Assembly*1 Displays the image transmitted by the rear television camera assembly on the screen.
Radio and Display Receiver Assembly*2
Park/Neutral Position Switch Assembly*3 Transmits the shift position signal to the radio and display receiver assembly.
Back-up Light Switch*4 Transmits the on/off signal of the back-up light switch assembly to the radio and display receiver assembly.



SYSTEM CONTROL


a.

This system operates when both the following conditions have been met:

·

The ignition switch is ON.

·

The shift lever is in R.




FUNCTION


a.

Area Displayed on Screen

i.

Objects on the right of the vehicle appear on the right side of the display panel, and objects on the left of the vehicle appear on the left side of the display panel.


ii.

The rear television camera assembly uses a wide-angle lens. The perceived distance from images that appear on the screen differs from the actual distance.

Y177329C01
0.292,4.469 0.604,4.667 0.313,0.198 10 false *a
*a The illustrations shown are examples only. The illustrations may differ from the actual vehicle screens. - -


NOTICE:

The area displayed on the screen may vary according to vehicle status or road conditions. The area covered by the rear television camera assembly is limited. The rear television camera assembly does not show objects close to either corner of the bumper or show the area under the bumper.




b.

Warning Message

i.

A warning message appears at the bottom of the screen under the following condition. The warning message appears in the same language that has been selected by the language selector of the navigation receiver assembly*1 or radio and display receiver assembly*2.

*1: Models with navigation system

*2: Models with display audio system (base grade) or display audio system


Message Appearing at Bottom of Screen
Warning Message Condition
Check surroundings for safety. This message always appears during system operation.




FAIL-SAFE


a.

The table below indicates fail-safe operation when a malfunction is detected:

Malfunctioning Part Detection Item Function
Rear Television Camera Assembly A rear television camera assembly malfunction signal is detected. The system stops signal reception and displays a dark screen.