OUTLINE
The smart entry and start system has the following main functions, making it a very user-friendly system.
| Function | Outline | |
|---|---|---|
| Start Function | The start function is operated by simply pressing the engine switch while carrying the electrical key transmitter sub-assembly. When the engine switch is pressed, the certification ECU turns on/off the ACC relay, IG1 relay and IG2 relay to switch the power source pattern.
·
The power source mode changes depending on the depression of the brake pedal*1 or clutch pedal*2 and the shift lever position*1. |
|
| Immobiliser | The immobiliser function compares the ID code registered in the certification ECU with the ID code of the transponder chip embedded in the electrical key transmitter sub-assembly. | |
| Steering Lock | The steering lock function is operated to lock and unlock the steering wheel by using a lock/unlock motor in the steering column assembly. | |
| Entry Function | Entry Unlock:
·
All doors unlock when the lock/unlock switch on an outside door handle is pressed. Entry Lock: ·
All doors lock when the lock/unlock switch on an outside door handle is pressed. |
|
| Wireless Door Lock Control | The wireless door lock control function is a convenient system for locking and unlocking all the doors at a distance. The basic operation is the same as that of the wireless door lock control system. | |
*1: Models with automatic transmission
*2: Models with manual transmission