Home › Engine / Hybrid System › 2TR-FBE ENGINE MECHANICAL › ENGINE UNIT › from 2016.07
NM33K0E _51 Engine / Hybrid System _053912 2TR-FBE ENGINE MECHANICAL _0262311 ENGINE UNIT GE GENERAL F

2TR-FBE ENGINE MECHANICAL  ENGINE UNIT  GENERAL  GENERAL  


OUTLINE


a.

The 2TR-FBE engine is an in-line 4-cylinder, 2.7-liter, 16-valve DOHC engine.


b.

On this engine, the Electronic Throttle Control System-intelligent (ETCS-i), Dual Variable Valve Timing-intelligent (Dual VVT-i) and air injection system are used. These control functions have been optimized to further improve engine performance and fuel economy, and reduce exhaust emissions.


c.

The following have been achieved by using alcohol fuel as an alternative to gasoline for environmental friendliness:

·

CO and soot in emission gas have been reduced.

·

The amount of sulfur accumulated in the catalytic converter has been reduced because alcohol fuel contains a smaller amount of sulfur. As a result, the durability of the catalytic converter has been improved.




SPECIFICATION


*1: Weight shows the figure with oil and coolant fully filled.

*2: For E100 (100% ethanol; actually 93% ethanol with water)

*3: For E22 (22% ethanol)

*4: Mixed fuel from E20 to E100 is available.

No. of Cyls. and Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve DOHC, Chain Drive (with Dual VVT-i)
Combustion Chamber Pentroof Type
Manifolds Cross-flow
Fuel System Sequential Multiport Fuel Injection (SFI)
Ignition System Direct Ignition System (DIS)
Displacement 2694 cm3 (164.4 cu. in.)
Bore x Stroke 95.0 mm x 95.0 mm (3.74 in. x 3.74 in.)
Compression Ratio 12.0 : 1
Max. Output [SAE-NET] 120 kW @ 5000 rpm*2
117 kW @ 5000 rpm*3
Max. Torque [SAE-NET] 245 N*m @ 4000 rpm
Valve Timing Intake Open 28° BTDC to -8° BTDC
Closed 36° ABDC to 72° ABDC
Exhaust Open 53° BBDC to 8° BBDC
Closed -1° ATDC to 44° ATDC
Spark Plug Manufacturer DENSO
Type FK20HR8-G
Plug Gap 0.7 mm to 0.8 mm (0.0276 in. to 0.0315 in.)
Firing Order 1 - 3 - 4 - 2
FUEL Alcohol Fuel*4
Emission Regulation TIER 1.5
Engine Service Mass (Reference)*1 161 kg (354.9 lb)


MAIN FEATURES


a.

This engine has been able to achieve the following performance through the use of the items listed below:

A: High performance and fuel economy

B: Low noise and vibration

C: Lightweight and compact design

D: Good serviceability

E: Clean emissions

Item A B C D E
Engine Proper A cylinder head cover made of plastic is used. - ○ ○ - -
A taper squish shape is used for the combustion chamber. ○ - - - ○
2 balance shafts are used. - ○ - - -
The piston skirt is coated with resin. ○ ○ - - ○
A No. 1 oil pan made of aluminum alloy is used. ○ ○ ○ - -
Valve Mechanism A valve mechanism, in which the camshafts actuate the roller rocker arms in order to open and close the valves, is used. ○ - - - ○
A Dual Variable Valve Timing-intelligent (Dual VVT-i) system is used. ○ - - - ○
Valve lash adjusters are used. ○ ○ - ○ ○
A timing chain and chain tensioner are used. ○ - ○ - -
Intake and Exhaust System An intake manifold made of plastic is used. - - ○ - -
A link-less type throttle body is used. - - ○ ○ -
A stainless steel exhaust manifold is used. - - ○ - -
Three-Way Catalytic Converters (TWCs) are used. - - - - ○
Fuel System Long nozzle, 12-hole type fuel injectors are used to improve the atomization of fuel. ○ - - - ○
Quick connectors are used to connect the fuel hose with the fuel pipe. - - - ○ -
Ignition System Long-reach type spark plugs are used. ○ - - - -
A Direct Ignition System (DIS) makes ignition timing adjustment unnecessary. ○ - - ○ ○
Serpentine Belt Drive System A serpentine belt drive system is used. - - ○ ○ -
Engine Control System An Electronic Throttle Control System-intelligent (ETCS-i) is used. ○ - - - ○
A flat type knock sensor is used. ○ - - - -
A no-contact sensor is used in the throttle position sensor and accelerator pedal position sensor. ○ - - - -
The use of an air fuel ratio sensor allows for precise control. - - - - ○
An air injection system is used. - - - - ○

HINT:

○: Available

-: Not available