Home › Engine / Hybrid System › 2TR-FBE EMISSION CONTROL › EMISSION CONTROL SYSTEM › from 2016.07
NM33K0E _51 Engine / Hybrid System _053914 2TR-FBE EMISSION CONTROL _0262313 EMISSION CONTROL SYSTEM DE DETAILS F

2TR-FBE EMISSION CONTROL  EMISSION CONTROL SYSTEM  DETAILS  AIR INJECTION CONTROL DRIVER  


OPERATION


a.

The air injection control driver is a non-contact type relay that uses semiconductors. Activated by the ECM, this driver actuates the air pump and the air switching valve.


b.

The air injection control driver also detects failures in the input and output circuits at the air injection control driver and transmits the failure status to the ECM via duty cycle signals.


c.

For details on the control of the air injection control driver, see the following system chart:

W126204E01
0.802,2.094 1.26,2.292 0.458,0.198 10 false ECM 1.583,0.417 2.042,0.615 0.458,0.198 10 false AIRP 1.583,1.583 2.042,1.781 0.458,0.198 10 false AIRV 1.583,2.719 2.042,2.917 0.458,0.198 10 false AIDI 1.583,3.885 2.042,4.083 0.458,0.198 10 false AIP 3.781,2.75 4.083,3.083 0.302,0.333 10 false DI 3.677,1.531 3.979,1.865 0.302,0.333 10 false SIV 3.688,0.375 3.99,0.708 0.302,0.333 10 false SIP 2.156,0.656 3.375,1.156 1.219,0.5 10 false Air Pump Actuation Request 2.135,1.844 3.323,2.344 1.188,0.5 10 false Air Switching Valve Actuation Request 2.25,3.49 3.438,3.99 1.188,0.5 10 false Duty Cycle Signal 1.906,4.177 3.938,4.5 2.031,0.323 10 false Air Injection Pressure Signal 4.135,1.625 4.969,2.188 0.833,0.563 10 false Air Injection Control Driver 5.188,1.021 6.021,1.583 0.833,0.563 10 false VP 5.188,2.135 6.021,2.698 0.833,0.563 10 false VV 5.365,1.396 6.708,1.833 1.344,0.438 10 false Air Pump Assembly 5.417,3.177 6.75,3.583 1.333,0.406 10 false Air Switching Valve Assembly 4.188,3.917 4.979,4.479 0.792,0.563 10 false Air Pressure Sensor

DI Terminal Output
Condition AIRP AIRV Output (Duty Cycle Signal)
Open circuit in line between AIDI and DI terminals. - -
W112594E01
0.104,0.531 0.563,0.729 0.458,0.198 8 false GND

Failure in line between ECM terminals and air injection control driver. - -
W112594E01
0.104,0.531 0.563,0.729 0.458,0.198 8 false GND

Output failure at air injection control driver. (Failure in air pump actuation circuit) - -
W112596E01
0.094,0.573 0.552,0.771 0.458,0.198 8 false GND 0.833,0.104 1.292,0.302 0.458,0.198 8 false 200 ms 1.667,0.083 2.198,0.323 0.531,0.24 8 false Duty 20%

Output failure at air injection control driver. (Failure in air switching valve actuation circuit) - -
W112597E01
0.094,0.573 0.552,0.771 0.458,0.198 8 false GND 1.677,0.073 2.198,0.333 0.521,0.26 8 false Duty 40%

Failure of air injection control driver caused by overheating. - -
W112598E01
0.094,0.583 0.469,0.74 0.375,0.156 8 false GND 1.667,0.073 2.208,0.323 0.542,0.25 8 false Duty 60%

Normal On On
W112600E01
0.094,0.583 0.469,0.74 0.375,0.156 8 false GND 1.656,0.083 2.198,0.323 0.542,0.24 8 false Duty 80%

Off Off
W112595E01
0.083,0.417 0.458,0.573 0.375,0.156 8 false GND

On Off
Off On