FUNCTION OF MAIN COMPONENTS
Injection Volume Correction Depending on Ethanol Concentration in Fuel
When the ethanol concentration in the fuel changes, the stoichiometric air fuel ratio also changes. Therefore, injection volume correction is performed depending on the ethanol concentration of the fuel to ensure starting performance and driveability at various ethanol concentrations.
The stoichiometric air fuel ratio for the gasoline engine vehicle is basically constant. On the other hand, the stoichiometric air fuel ratio for the Flexible Fuel Vehicle (FFV) changes depending on the ethanol concentration of the fuel.
The stoichiometric air fuel ratio for the FFV increases when the ethanol concentration of the fuel is low, and decreases when the ethanol concentration of the fuel is high.
The ECM calculates the stoichiometric air fuel ratio of the fuel in the fuel tank based on the intake air mass, the signal from the air fuel ratio sensor, and the feedback value of the injection volume. Then, the ECM compares the calculated stoichiometric air fuel ratio of the fuel in the fuel tank with that of gasoline, and estimates the ethanol concentration of the fuel in the fuel tank.
The estimated value of the ethanol concentration is updated as necessary.
The ECM performs injection volume correction depending on the estimated ethanol concentration.