OUTLINE
A dry type single plate clutch, which is operated by hydraulic pressure, is used.
A low-peak effort clutch type clutch cover is used on models with a 1GD-FTV engine.
A resin clutch master cylinder is used. Also, on models with the intelligent Manual Transmission (iMT) system, an integrated clutch stroke sensor type master cylinder assembly is used.
A clutch accumulator assembly is used on diesel engine models.
A clutch pedal with turnover spring is used on diesel engine models.
A clutch start system is used.
SPECIFICATION
Models with 2TR-FE or 2TR-FBE Engine
| Clutch | Type | Single Dry Plate, Diaphragm |
| Operation | Hydraulic | |
| Clutch Cover | Type | Conventional |
| Installed Load | 6370 N | |
| Clutch Disc | Facing Size* | 250.0 mm x 160.0 mm (9.8 in. x 6.3 in.) |
| Master Cylinder | Type | Plunger |
| Cylinder Diameter | 15.87 mm (0.62 in.) | |
| Release Cylinder | Type | Conventional |
| Cylinder Diameter | 22.2 mm (0.87 in.) | |
| Clutch Pedal | Without Turnover Spring | |
*: Outer diameter x inner diameter
Models with 1GD-FTV Engine
| Clutch | Type | Single Dry Plate, Diaphragm |
| Operation | Hydraulic | |
| Clutch Cover | Type | Low-peak Effort Clutch |
| Installed Load | 9300 N | |
| Clutch Disc | Facing Size* | 275.0 mm x 175.0 mm (10.8 in. x 6.9 in.) |
| Master Cylinder | Type | Plunger |
| Cylinder Diameter | 19.05 mm (0.75 in.) | |
| Release Cylinder | Type | Conventional |
| Cylinder Diameter | 22.2 mm (0.87 in.) | |
| Clutch Pedal | With Turnover Spring | |
*: Outer diameter x inner diameter
Models with 1KD-FTV Engine
| Clutch | Type | Single Dry Plate, Diaphragm |
| Operation | Hydraulic | |
| Clutch Cover | Type | Conventional |
| Installed Load | 7850 N | |
| Clutch Disc | Facing Size* | 275.0 mm x 175.0 mm (10.8 in. x 6.9 in.) |
| Master Cylinder | Type | Plunger |
| Cylinder Diameter | 19.05 mm (0.75 in.) | |
| Release Cylinder | Type | Conventional |
| Cylinder Diameter | 23.81 mm (0.94 in.) | |
| Clutch Pedal | With Turnover Spring | |
*: Outer diameter x inner diameter