Home › Engine / Hybrid System › 1KD-FTV STARTING › STARTING SYSTEM › from 2016.10
NM33K0E _51 Engine / Hybrid System _043761 1KD-FTV STARTING _0204748 STARTING SYSTEM GE GENERAL F

1KD-FTV STARTING  STARTING SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A planetary reduction type starter assembly is used.


b.

A starter control (cranking hold function) is used.*

*: Models with smart entry and start system




SPECIFICATION


Starter Assembly (TMMIN Made Models)

*1: Length from the mounted area to the rear end of the starter

*2: Viewed from pinion side

Manufacture DENSO
Rated Output 2.0 kW
Rated Voltage 12 V
Length*1 196.1 mm (7.72 in.)
Weight 3550 g (7.8 lb)
Rotational Direction*2 Clockwise

Starter Assembly (TASA Made Models with M/T)

*1: Length from the mounted area to the rear end of the starter

*2: Viewed from pinion side

Manufacture DENSO BOSCH
Rated Output 2.0 kW 1.9 kW
Rated Voltage 12 V 12 V
Length*1 196.1 mm (7.72 in.) 224.0 mm (8.82 in.)
Weight 3550 g (7.8 lb) 4500 g (9.9 lb)
Rotational Direction*2 Clockwise Clockwise

Starter Assembly (TASA Made Models with A/T)

*1: Length from the mounted area to the rear end of the starter

*2: Viewed from pinion side

Manufacture DENSO BOSCH
Rated Output 2.0 kW 2.0 kW
Rated Voltage 12 V 12 V
Length*1 196.1 mm (7.72 in.) 234.3 mm (9.22 in.)
Weight 3550 g (7.8 lb) 4800 g (10.6 lb)
Rotational Direction*2 Clockwise Clockwise