35301B
1.REMOVE STATOR SHAFT O-RING
Remove the stator shaft O-ring from the oil pump assembly.
35301
2.SECURE FRONT OIL PUMP BODY SUB-ASSEMBLY
| *1 | Torque Converter Assembly |
Place the oil pump assembly on the torque converter assembly.
35617
3.REMOVE CLUTCH DRUM OIL SEAL RING
Remove the 3 clutch drum oil seal rings.
35370
4.REMOVE STATOR SHAFT ASSEMBLY
Using a T30 "TORX" socket wrench, remove the 14 screws and the stator shaft assembly.
35301B
5.REMOVE FRONT OIL PUMP BODY O-RING
Remove the front oil pump body O-ring from the front oil pump body sub-assembly.
Remove the front oil pump body sub-assembly from the torque converter assembly.
35301
6.INSPECT FRONT OIL PUMP BODY SUB-ASSEMBLY
35370
7.INSPECT STATOR SHAFT ASSEMBLY
8.INSPECT CLEARANCE OF OIL PUMP ASSEMBLY
35321
9.REMOVE FRONT OIL PUMP DRIVE GEAR
Remove the front oil pump drive gear.
35322
10.REMOVE FRONT OIL PUMP DRIVEN GEAR
Remove the front oil pump driven gear.
35301A
11.REMOVE FRONT OIL PUMP OIL SEAL
| *a | Protective Tape |
Using a screwdriver, remove the front oil pump oil seal.
Be careful not to damage the front oil pump oil seal and front oil pump body sub-assembly.
Tape the screwdriver tip before use.