Home › Drivetrain › A750F AUTOMATIC TRANSMISSION / TRANSAXLE › OIL PUMP
RM33K0E _52 Drivetrain _043590 A750F AUTOMATIC TRANSMISSION / TRANSAXLE _0211130 OIL PUMP A

A750F AUTOMATIC TRANSMISSION / TRANSAXLE  OIL PUMP  REASSEMBLY  


PROCEDURE

Hide 35301A 1.INSTALL FRONT OIL PUMP OIL SEAL

a.
C210173N02
1.823,1.365 2.271,1.365 true 2.323,1.281 2.698,1.469 0.375,0.188 10 false SST

Using SST and a hammer, install a new front oil pump oil seal.

SST
09350-30020  (09351-32140)

Oil seal drive in depth:

-0.2 to 0.2 mm (-0.00787 to 0.00787 in.)


HINT:

The front oil pump oil seal end should be flush with the outer edge of the front oil pump body sub-assembly.



b.

Coat the front oil pump oil seal lip with MP grease.


Hide 35301 2.SECURE FRONT OIL PUMP BODY SUB-ASSEMBLY

a.
C108578C02
0.802,1.26 0.479,1.26 false 0.302,1.156 0.51,1.344 0.208,0.188 10 false *1
*1 Torque Converter Assembly


Place the front oil pump body sub-assembly on the torque converter assembly.


Hide 35322 3.INSTALL FRONT OIL PUMP DRIVEN GEAR

a.

Coat the front oil pump driven gear with ATF.


b.
C324222

Install the front oil pump driven gear to the front oil pump body sub-assembly.


Hide 35321 4.INSTALL FRONT OIL PUMP DRIVE GEAR

a.

Coat the front oil pump drive gear with ATF.


b.
C324221

Install the front oil pump drive gear to the front oil pump body sub-assembly.


Hide 35301B 5.INSTALL FRONT OIL PUMP BODY O-RING

a.
C324220

Coat a new front oil pump body O-ring with ATF and install it to the front oil pump body sub-assembly.


Hide 35370 6.INSTALL STATOR SHAFT ASSEMBLY

a.

Align the bolt holes of the stator shaft assembly with the bolt holes of the front oil pump body sub-assembly and install the stator shaft assembly to the front oil pump body sub-assembly.


b.
C324219

Using T30 "TORX" socket wrench, install the stator shaft assembly with 14 screws.

Torque:
10.8 N*m (110 kgf*cm, 8 ft.*lbf)


Hide 35617 7.INSTALL CLUTCH DRUM OIL SEAL RING

a.

Coat 3 new clutch drum oil seal rings with ATF.


b.
C324218N01
2.063,0.26 2.521,0.458 0.458,0.198 10 false x 3

Squeeze the ends of the 3 clutch drum oil seal rings so that the gap distance becomes 8 mm or less, and then install them to the stator shaft assembly groove.

NOTICE:

Do not expand the ring ends excessively.


HINT:

After installing the clutch drum oil seal rings, check that they rotate smoothly.



Hide 8.INSPECT OIL PUMP DRIVE GEAR ROTATION

Hide 35301B 9.INSTALL STATOR SHAFT O-RING

a.
C324217

Coat a new stator shaft O-ring with ATF and install it to the oil pump assembly.