Home › Power Source / Network › 1GR-FE BATTERY / CHARGING › GENERATOR
RM33K0E _57 Power Source / Network _043598 1GR-FE BATTERY / CHARGING _0211296 GENERATOR A

1GR-FE BATTERY / CHARGING  GENERATOR  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 74404B 3.REMOVE BATTERY CLAMP SUB-ASSEMBLY

a.
A346986

Loosen the 2 nuts.


b.

Remove the 2 battery clamp bolts and battery clamp sub-assembly.


Hide 28899 4.REMOVE BATTERY INSULATOR

Hide 28800 5.REMOVE BATTERY

Hide 74431 6.REMOVE BATTERY TRAY

Hide 16361A 7.REMOVE FAN AND GENERATOR V BELT

Hide 8.REMOVE OIL BAFFLE PLATE

a.
A344381

Remove the bolt and oil baffle plate.


Hide 53737B 9.REMOVE FRONT UPPER FENDER APRON SEAL LH

Hide 27020 10.REMOVE GENERATOR ASSEMBLY

a.
A346987

Remove the terminal cap.


b.

Remove the nut and disconnect the wire harness from terminal B.


c.

Disconnect the generator connector from the generator assembly.


d.

Remove the 2 bolts and disconnect the wire harness together with the 2 wire harness brackets.


e.
A347886

Disconnect the charcoal canister hose and detach the clamp.


f.

Detach the clamp and disconnect the differential hose.


g.

Detach the clamp and disconnect the wire harness.


h.

Remove the bolt and differential breather bracket.


i.
A347887

Remove the 2 bolts and generator bracket.


j.
A346988

Remove the 2 bolts and generator assembly.