Home › Power Source / Network › 1GD-FTV BATTERY / CHARGING › GENERATOR(for 90A Type)
RM33K0E _57 Power Source / Network _043544 1GD-FTV BATTERY / CHARGING _0211318 GENERATOR(for 90A Type) A

1GD-FTV BATTERY / CHARGING  GENERATOR(for 90A Type)  DISASSEMBLY  


PROCEDURE

Hide 27416 1.REMOVE GENERATOR PULLEY CAP

a.
A317241

Using a screwdriver, remove the generator pulley cap.


Hide 27415 2.REMOVE GENERATOR PULLEY WITH CLUTCH

a.
A317242C01
1.083,0.521 1.594,0.521 false 1.01,1.49 1.521,1.49 false 0.896,0.427 1.208,0.583 0.313,0.156 10 false *a 0.729,1.417 1.188,1.615 0.458,0.198 10 false SST
*a T50 "TORX" Socket Wrench


Set SST and a T50 "TORX" socket wrench as shown in the illustration.

SST
09820-30010  


b.

Secure the generator assembly in a vise between aluminum plates.


c.
A317243C01
1.25,0.208 1.625,0.208 1.625,0.208 1.875,1.01 false 1.198,2.635 1.51,2.635 1.51,2.635 1.656,1.177 true 1.865,2.656 2.177,2.813 0.313,0.156 10 false *a 2.865,3.063 3.177,3.219 0.313,0.156 10 false *b 1.104,0.104 1.417,0.26 0.313,0.156 10 false *c 0.906,2.563 1.365,2.76 0.458,0.198 10 false SST
*a Hold
*b Turn
*c T50 "TORX" Socket Wrench


While holding SST in place, rotate the T50 "TORX" socket wrench clockwise, and remove the generator pulley with clutch.

NOTICE:

Check that the generator drive end frame is secured in the vise tightly.