Home › Drivetrain › AC60E AUTOMATIC TRANSMISSION / TRANSAXLE › PARK / NEUTRAL POSITION SWITCH
RM33K0E _52 Drivetrain _043591 AC60E AUTOMATIC TRANSMISSION / TRANSAXLE _0212125 PARK / NEUTRAL POSITION SWITCH N

AC60E AUTOMATIC TRANSMISSION / TRANSAXLE  PARK / NEUTRAL POSITION SWITCH  ADJUSTMENT  


PROCEDURE

Hide 35979B 1.REMOVE TRANSMISSION INSULATOR RH

Hide 84540 2.ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY

a.

While pushing the shift lock release button, move the shift lever to N.


b.

Remove the bolt of the park/neutral position switch assembly.


c.

Clean the bolt and bolt hole.


d.

Apply adhesive to 2 or 3 threads on the end of the bolt.

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent



e.
D025795C15
1.979,1.563 2.729,1.563 true 1.969,0.635 2.75,0.635 true 2.792,0.531 3.063,0.708 0.271,0.177 10 false *a 2.781,1.469 3.292,1.667 0.51,0.198 10 false *b
*a Neutral Basic Line
*b Groove


Align the neutral basic line with the groove as shown in the illustration.


f.

Hold the park/neutral position switch assembly in position and install the bolt.

Torque:
12.8 N*m (131 kgf*cm, 9 ft.*lbf)


g.

After the adjustment, perform the park/neutral position switch assembly operation check.

Click hereDrivetrain>AC60E AUTOMATIC TRANSMISSION / TRANSAXLE>PARK / NEUTRAL POSITION SWITCH>ON-VEHICLE INSPECTION


Hide 35979B 3.INSTALL TRANSMISSION INSULATOR RH