Home › Drivetrain › R151F MANUAL TRANSMISSION / TRANSAXLE › INPUT SHAFT
RM33K0E _52 Drivetrain _043592 R151F MANUAL TRANSMISSION / TRANSAXLE _0212636 INPUT SHAFT A

R151F MANUAL TRANSMISSION / TRANSAXLE  INPUT SHAFT  REASSEMBLY  


PROCEDURE

Hide 33311A 1.INSTALL INPUT SHAFT FRONT BEARING

a.
C315194N01
0.865,0.896 0.5,0.729 0.5,0.729 1.01,0.615 true 0.083,0.677 0.542,0.875 0.458,0.198 10 false SST

Using SST and a press, press in a new input shaft front bearing to the input shaft.

SST
09950-60010  (09951-00570)
09950-70010  (09951-07100)

NOTICE:

Install the input shaft front bearing so that the snap ring groove is on the front side.



Hide 33311G 2.INSTALL FRONT BEARING SHAFT SNAP RING

a.

Select a new front bearing shaft snap ring so that the clearance between the input shaft and front input shaft bearing is within the specification.

Standard clearance:

0.10 mm (0.00393 in.) or less


Snap Ring Thickness:
Thickness
2.10 to 2.15 mm (0.0827 to 0.0846 in.)
2.15 to 2.20 mm (0.0847 to 0.0866 in.)
2.20 to 2.25 mm (0.0867 to 0.0885 in.)
2.25 to 2.30 mm (0.0886 to 0.0905 in.)
2.30 to 2.35 mm (0.0906 to 0.0925 in.)
2.35 to 2.40 mm (0.0926 to 0.0944 in.)
2.40 to 2.45 mm (0.0945 to 0.0964 in.)



b.
C315195

Using a snap ring expander, install the front bearing shaft snap ring.


Hide 33311D 3.INSTALL INPUT SHAFT BEARING

a.
C315196

Apply gear oil to the input shaft bearing, and install it to the input shaft.