86860
1.INSPECT NAVIGATION ANTENNA ASSEMBLY
| *a | Component without harness connected
(Navigation Antenna Assembly) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | Always | 50 to 500 Ω |
If the result is not as specified, replace the navigation antenna assembly.
86808
2.INSPECT NO. 1 NAVIGATION ANTENNA CORD SUB-ASSEMBLY
Measure the resistance according to the value(s) in the table below.
| *a | Component without harness connected
(No. 1 Navigation Antenna Cord Sub-assembly) |
- | - |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| A-1 - B-1 | Always | Below 1 Ω |
| A-2 - B-2 | Always | Below 1 Ω |
If the result is not as specified, replace the No. 1 navigation antenna cord sub-assembly.