Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › SECURITY INDICATOR LIGHT ASSEMBLY
RM33K0E _58 Vehicle Interior _043548 THEFT DETERRENT / KEYLESS ENTRY _0213910 SECURITY INDICATOR LIGHT ASSEMBLY G

THEFT DETERRENT / KEYLESS ENTRY  SECURITY INDICATOR LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81850Z 1.INSPECT THEFT WARNING INDICATOR LIGHT ASSEMBLY

B273451C04
1.479,1.51 0.667,1.51 true 1.5,1.042 0.688,1.042 true 0.458,0.969 0.781,1.125 0.323,0.156 10 false LP 0.521,1.438 0.875,1.583 0.354,0.146 10 false E 0.115,0.083 0.292,0.24 0.177,0.156 10 false *a
*a Component without harness connected
(Theft Warning Indicator Light Assembly)


a.

Apply battery voltage between the terminals of the theft warning indicator light assembly, and check the illumination of the theft warning indicator light assembly.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 2 (LP)
Battery negative (-) → Terminal 6 (E)
Illuminates


NOTICE:
·

If the positive (+) lead and the negative (-) lead are incorrectly connected, the theft warning indicator light assembly will not illuminate.

·

If the voltage is too low, the theft warning indicator light assembly will not illuminate.



If the result is not as specified, replace the theft warning indicator light assembly.