Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio and Display Type)
RM33K0E _56 Audio / Visual / Telematics _043541 AUDIO / VIDEO _0218826 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  Data Signal Circuit between Radio Receiver and Stereo Jack Adapter  


DESCRIPTION

The No. 1 stereo jack adapter assembly sends the sound data signal or image data signal from a USB device to the radio and display receiver assembly via this circuit.

WIRING DIAGRAM

E317765E02
1.135,3.281 3.917,3.531 2.781,0.25 10 false : Data Signal (USB Communication Line) 3.792,3.281 6.573,3.531 2.781,0.25 10 false *: Shielded 3.563,2.167 6.344,2.417 2.781,0.25 10 false * 5.99,0.823 6.677,1.135 0.688,0.313 10 false US1+ 5.969,1.375 6.656,1.688 0.688,0.313 10 false US1- 5.979,1.917 6.667,2.229 0.688,0.313 10 false USG1 0.833,1.979 1.521,2.292 0.688,0.313 10 false USG1 5.771,0.698 6.458,1.01 0.688,0.313 10 false 3 1.323,0.708 2.01,1.021 0.688,0.313 10 false 3 0.875,0.833 1.563,1.146 0.688,0.313 10 false US1+ 0.896,1.417 1.583,1.729 0.688,0.313 10 false US1- 5.771,1.281 6.458,1.594 0.688,0.313 10 false 2 1.313,1.292 2,1.604 0.688,0.313 10 false 2 1.333,1.875 2.021,2.188 0.688,0.313 10 false 5 5.781,1.885 6.469,2.198 0.688,0.313 10 false 5 2.729,2.594 4.667,3 1.938,0.406 10 false Radio Wiring Sub-assembly 0.344,2.427 1.521,2.802 1.177,0.375 10 false a1 0.344,2.594 1.521,2.969 1.177,0.375 10 false No. 1 Stereo Jack Adapter Assembly 5.771,2.458 6.948,2.833 1.177,0.375 10 false a3 5.76,2.646 6.969,3.021 1.208,0.375 10 false Radio and Display Receiver Assembly

PROCEDURE

1.CHECK RADIO WIRING SUB-ASSEMBLY
a.

Disconnect the radio and display receiver assembly connector.


b.
E317786C04
1.5,0.188 1.958,0.448 0.458,0.26 1.49,2.333 1.948,2.594 0.458,0.26 0.927,1.281 1.094,1.281 1.094,1.281 1.521,1.552 true 1.938,1.563 2.354,1.365 2.354,1.365 2.573,1.365 true 1.844,1.698 2.354,2.083 2.354,2.083 2.573,2.083 true 0.896,3.063 1.063,3.063 1.063,3.063 1.563,3.26 true 1.865,3.26 2.333,3.042 2.333,3.042 2.552,3.042 true 0.906,3.656 1.073,3.656 1.073,3.656 1.333,3.479 true 0.125,0.094 0.438,0.25 0.313,0.156 10 false *a 0.083,2.375 0.396,2.531 0.313,0.156 10 false *b 1.635,0.229 1.948,0.385 0.313,0.156 10 false a3 1.646,2.365 1.958,2.521 0.313,0.156 10 false a1 2.625,1.281 3.167,1.5 0.542,0.219 10 false US1- 0.552,1.188 1.094,1.406 0.542,0.219 10 false US1+ 2.635,1.958 3.177,2.177 0.542,0.219 10 false USG1 0.542,2.948 1.083,3.167 0.542,0.219 10 false US1- 2.625,2.927 3.167,3.146 0.542,0.219 10 false US1+ 0.5,3.542 1.042,3.76 0.542,0.219 10 false USG1
*a Front view of wire harness connector
(to Radio and Display Receiver Assembly)
*b Front view of wire harness connector
(to No. 1 Stereo Jack Adapter Assembly)


Disconnect the No. 1 stereo jack adapter assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
a1-3 (US1+) - a3-3 (US1+) Always Below 1 Ω
a1-2 (US1-) - a3-2 (US1-) Always Below 1 Ω
a1-3 (US1+) or a3-3 (US1+) - Body ground Always 10 kΩ or higher
a1-2 (US1-) or a3-2 (US1-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

NG

REPLACE RADIO WIRING SUB-ASSEMBLY