Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio Receiver Type)
RM33K0E _56 Audio / Visual / Telematics _043541 AUDIO / VIDEO _0218827 AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio Receiver Type)  Illumination Circuit  


DESCRIPTION

The radio receiver assembly and steering pad switch assembly illuminates when the headlight dimmer switch is in the tail or head position.

WIRING DIAGRAM

E323303E06
2.031,0.656 4.323,0.854 2.292,0.198 10 false from TAIL Relay 5.49,0.469 5.771,0.646 0.281,0.177 10 false 10 5.406,0.688 6,0.906 0.594,0.219 10 false G104 5.875,0.688 6.469,0.906 0.594,0.219 10 false ILL+ 5.406,5.01 6,5.229 0.594,0.219 10 false G105 5.865,4.99 6.458,5.208 0.594,0.219 10 false ILL- 5.542,4.802 6.135,5.021 0.594,0.219 10 false 5 3.396,1.51 3.677,1.656 0.281,0.146 10 false G4 3.385,2.604 3.667,2.75 0.281,0.146 10 false G4 2.333,1.521 2.615,1.667 0.281,0.146 10 false z2 2.375,1.292 2.656,1.438 0.281,0.146 10 false 5 2.333,2.604 2.615,2.75 0.281,0.146 10 false z2 2.365,2.406 2.646,2.552 0.281,0.146 10 false 8 3.417,1.323 3.698,1.469 0.281,0.146 10 false 13 3.458,2.406 3.74,2.552 0.281,0.146 10 false 3 2.823,1.417 3.323,1.563 0.5,0.146 10 false IL+2 2.813,2.521 3.313,2.667 0.5,0.146 10 false EAU 2.344,3.938 5.063,4.146 2.719,0.208 10 false Spiral with Sensor Cable Sub-assembly 0.667,5.583 0.938,5.76 0.271,0.177 10 false G9 0.698,3.938 1.99,4.271 1.292,0.333 10 false Steering Pad Switch Assembly 0.677,5.771 2.76,6.042 2.083,0.271 10 false Combination Meter Assembly 1.281,4.99 1.708,5.208 0.427,0.219 10 false ILL- 1.646,4.896 2.021,5.094 0.375,0.198 10 false 21 2.635,4.865 3.01,5.063 0.375,0.198 10 false *1 3.635,5.198 4.01,5.396 0.375,0.198 10 false *2 0.146,6.167 2,6.354 1.854,0.188 10 false *1: for TFT Display Type 0.156,6.458 2.01,6.646 1.854,0.188 10 false *2: except TFT Display Type 5.521,5.646 7.135,5.885 1.615,0.24 10 false Radio Receiver Assembly

CAUTION / NOTICE / HINT

NOTICE:

The vehicle is equipped with a Supplemental Restraint System (SRS) which includes components such as airbags. Before servicing (including removal or installation of parts), be sure to read the precaution for Supplemental Restraint System.

for Type A: Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM(for Type A)>PRECAUTION

for Type B: Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM(for Type B)>PRECAUTION


PROCEDURE

1.CHECK ILLUMINATION
a.

Check if the illumination for the radio receiver assembly, steering pad switch assembly or others (hazard switch etc.) comes on when the turn signal switch is turned to the head or tail position.


Result:
Result Proceed to
Illumination comes on for all components except steering pad switch assembly. A
Illumination comes on for all components except radio receiver assembly. B
No illumination comes on (radio receiver assembly, steering pad switch, hazard switch etc.). C



A

2.INSPECT STEERING PAD SWITCH ASSEMBLY

B

5.CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY - COMBINATION METER ASSEMBLY AND BATTERY)

C

2.INSPECT STEERING PAD SWITCH ASSEMBLY
a.

Remove the steering pad switch assembly.

Click hereSteering>STEERING COLUMN>STEERING PAD SWITCH>REMOVAL


b.

Inspect the steering pad switch assembly.

Click hereSteering>STEERING COLUMN>STEERING PAD SWITCH>INSPECTION


Result:
Proceed to
OK
NG



OK

3.INSPECT SPIRAL WITH SENSOR CABLE SUB-ASSEMBLY

NG

REPLACE STEERING PAD SWITCH ASSEMBLY

3.INSPECT SPIRAL WITH SENSOR CABLE SUB-ASSEMBLY
a.

Remove the spiral with sensor cable sub-assembly.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>SPIRAL CABLE>REMOVAL


b.

Inspect the spiral with sensor cable sub-assembly.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>SPIRAL CABLE>INSPECTION


Result:
Proceed to
OK
NG



OK

4.CHECK HARNESS AND CONNECTOR (SPIRAL WITH SENSOR CABLE SUB-ASSEMBLY - RADIO RECEIVER ASSEMBLY AND BATTERY)

NG

REPLACE SPIRAL WITH SENSOR CABLE SUB-ASSEMBLY

4.CHECK HARNESS AND CONNECTOR (SPIRAL WITH SENSOR CABLE SUB-ASSEMBLY - RADIO RECEIVER ASSEMBLY AND BATTERY)
a.

Disconnect the G4 spiral with sensor cable sub-assembly connector.


b.

Disconnect the G108 radio receiver assembly connector.


c.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition
G4-13 (IL+2) - Body ground Headlight dimmer switch in tail or head position 11 to 14 V



d.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
G4-3 (EAU) - G108-23 (SWG) Always Below 1 Ω
G4-3 (EAU) or G108-23 (SWG) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

5.CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY - COMBINATION METER ASSEMBLY AND BATTERY)
a.

Disconnect the G104 and G105 radio receiver assembly connectors.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition
G104-10 (ILL+) - Body ground Headlight dimmer switch in tail or head position 11 to 14 V



c.

for TFT Display Type:

Disconnect the G9 combination meter assembly connector.


d.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
for TFT Display Type
Tester Connection Condition Specified Condition
G105-5 (ILL-) - G9-21 (ILL-) Always Below 1 Ω
G105-5 (ILL-) or G9-21 (ILL-) - Body ground Always 10 kΩ or higher

except TFT Display Type
Tester Connection Condition Specified Condition
G105-5 (ILL-) - Body ground Always Below 1 Ω



Result:
Proceed to
OK
NG



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR