Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM
RM33K0E _59 Vehicle Exterior _043562 LIGHTING (EXT) _0219486 LIGHTING SYSTEM D

LIGHTING (EXT)  LIGHTING SYSTEM  OPERATION CHECK  


AUTOMATIC LIGHT CONTROL SYSTEM OPERATION CHECK


a.

Turn the engine switch on (IG).


b.

Turn the headlight dimmer switch (light control switch) to the AUTO position.


c.

Cover the automatic light control sensor.


d.

Check that the taillights and low beam headlights come on.


e.

Uncover the automatic light control sensor.


f.

Check that the low beam headlights and taillights turn off.



LIGHT AUTO TURN-OFF SYSTEM OPERATION CHECK


a.

Prepare the vehicle so that the engine switch is on (IG) and the driver door is closed.


b.

Set the headlight dimmer switch (light control switch) to the tail, head or AUTO position to illuminate the lights.


c.

Turn the engine switch off and open the driver door. Check that the headlights, front fog lights, rear fog lights, taillights, clearance lights and license plate light turn off.



DAYTIME RUNNING LIGHT SYSTEM


a.

Headlight dimmer switch (light control switch) is in the AUTO position (and the low beam headlights are not turned on via the automatic light control system).


b.

Start the engine.


c.

Release the parking brake.


d.

Check that the daytime running lights come on.



FOLLOW ME HOME SYSTEM


a.

Turn the engine switch off.


b.

Turn the light control switch to the off or AUTO position.


c.

Pull the light control switch to flash the headlights once.


d.

Check that the low beam headlights come on for approximately 30 seconds.



LANE CHANGE FLASHER SYSTEM OPERATION CHECK


NOTICE:

Perform this inspection with the customize parameter at the initial setting.


a.

Turn the engine switch on (IG).


b.

Check that the turn signal light flashes a specified number of times when the turn signal switch is moved to the lane change position (it is not necessary to hold the switch).


c.

While the turn signal light is flashing after the turn signal switch is moved to the lane change position (it is not necessary to hold the switch), check that the turn signal light turns off after the turn signal switch is moved in the opposite direction.