Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
87961
1.REMOVE OUTER MIRROR LH
87945
2.REMOVE OUTER MIRROR COVER LH
81740
3.REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH
Remove the 2 screws.
|
Protective Tape |
Using a screwdriver, detach the claw.
Tape the screwdriver tip before use.
|
Remove in this Direction |
Detach the claw and remove the under cover together with the side turn signal light assembly LH.
Detach the wire harness clamp and disconnect the connector.