Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY
RM33K0E _59 Vehicle Exterior _043562 LIGHTING (EXT) _0219495 REAR COMBINATION LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81565 1.INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH

a.

Attach the wire harness clamp to install the rear combination light socket and wire sub-assembly LH.


b.

Connect the connector.


c.
E319878C01
0.958,1.229 1.375,0.813 true 0.49,0.677 1.24,0.542 true 1.646,2.833 2.813,2.833 true 0.771,1.167 0.969,1.375 0.198,0.208 10 true *a 0.302,0.594 0.615,0.75 0.313,0.156 10 false *b 2.885,2.729 3.198,2.885 0.313,0.156 10 false *c
*a Matchmark
*b Unlock Position Mark
*c Lock Position Mark
V113147

Clockwise


Align the matchmark of the connector cap to the unlock position mark, and then rotate the connector cap clockwise until the lock position mark to connect the connector cap.


Hide 81550N 2.INSTALL BACK UP LIGHT BULB

a.

Install the back up light bulb to the bulb socket.


b.
E319874C01
1.354,1.604 1.958,1.958 true 1.198,1.813 0.729,2.26 true 0.521,3.302 0.896,3.583 true 2.01,1.885 2.208,2.083 0.198,0.198 10 true *a 0.552,2.208 0.865,2.365 0.313,0.156 10 false *b 0.354,3.188 0.667,3.344 0.313,0.156 10 false *c
*a Matchmark
*b Unlock Position Mark
*c Lock Position Mark
V113147

Clockwise


Align the matchmark of the bulb socket to the unlock position mark, and then rotate the bulb socket clockwise until the lock position mark to connect the bulb socket.


Hide 81550L 3.INSTALL REAR TURN SIGNAL LIGHT BULB

a.

Install the rear turn signal light bulb to the bulb socket.


b.
E319876C01
1.365,1.906 1.865,2.01 true 0.646,1.021 1.427,1.729 true 0.5,3.75 0.99,4 true 1.917,1.927 2.135,2.135 0.219,0.208 10 true *b 0.448,0.906 0.76,1.063 0.313,0.156 10 false *a 0.333,3.646 0.646,3.802 0.313,0.156 10 false *c
*a Matchmark
*b Unlock Position Mark
*c Lock Position Mark
V113147

Clockwise


Align the matchmark of the bulb socket to the unlock position mark, and then rotate the bulb socket clockwise until the lock position mark to connect the bulb socket.