Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81560
1.DISCONNECT REAR COMBINATION LIGHT ASSEMBLY LH
81550N
2.REMOVE BACK UP LIGHT BULB
| *a | Matchmark |
| *b | Unlock Position Mark |
|
Counterclockwise |
Turn the bulb socket counterclockwise until the matchmark is aligned with the unlock position mark to disconnect the bulb socket.
Remove the rear turn signal light bulb from the bulb socket.
81550N
3.INSTALL BACK UP LIGHT BULB
Install the rear turn signal light bulb to the bulb socket.
| *a | Matchmark |
| *b | Unlock Position Mark |
| *c | Lock Position Mark |
|
Clockwise |
Align the matchmark of the bulb socket to the unlock position mark, and then rotate the bulb socket clockwise until the lock position mark to connect the bulb socket.
81560
4.CONNECT REAR COMBINATION LIGHT ASSEMBLY LH