Home › Vehicle Exterior › LIGHTING (EXT) › LICENSE PLATE LIGHT ASSEMBLY
RM33K0E _59 Vehicle Exterior _043562 LIGHTING (EXT) _0219499 LICENSE PLATE LIGHT ASSEMBLY A

LIGHTING (EXT)  LICENSE PLATE LIGHT ASSEMBLY  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81270B 1.REMOVE LICENSE PLATE LIGHT BULB

a.
E323053C01
2.573,1.542 2.885,1.833 true 2.938,1.76 3.25,1.917 0.313,0.156 10 false *a
*a Insert in Hole
V100155

Protective Tape
V113147

Push in this Direction


Insert a screwdriver into the hole of the license plate light lens.

HINT:

Tape the screwdriver tip before use.



b.

Slightly push the screwdriver in the direction indicated by the arrow shown in the illustration to widen the license plate light lens with the tip of the screwdriver to detach the claw.


c.

Detach the remaining claw and remove the license plate light lens.


d.
E291970

Remove the license plate light bulb.