Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR WEATHERSTRIP
RM33K0E _59 Vehicle Exterior _043559 DOOR / HATCH _0219598 BACK DOOR WEATHERSTRIP A

DOOR / HATCH  BACK DOOR WEATHERSTRIP  INSTALLATION  


PROCEDURE

Hide 67881A 1.INSTALL BACK DOOR WEATHERSTRIP

B408676C01
1.938,4.375 2.354,4.375 false 2.406,4.281 2.719,4.479 0.313,0.198 10 false *a
*a Paint Mark
V100135

Marking Position
V100136

Weatherstrip Joint


a.

Remove any non-drying sealer on the body with non-residue solvent.


b.

Align the paint marks with the positions on the body flange and install a new back door weatherstrip.

NOTICE:
·

Always align the paint mark when installing the part. If the paint mark position is out of place, coolant leaks may occur.

·

After the installation, check that the corners are properly installed.



HINT:

To easily install the weatherstrip, first install the area with the paint mark as shown in the illustration. Then install the part toward the corners and push any excess length into the corners.