Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR SUPPORT
RM33K0E _59 Vehicle Exterior _043559 DOOR / HATCH _0219607 BACK DOOR SUPPORT A

DOOR / HATCH  BACK DOOR SUPPORT  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 68960 1.REMOVE BACK DOOR STAY ASSEMBLY LH

NOTICE:
·

Avoid touching the piston rod as much as possible to prevent foreign matter from attaching to it. Be sure to hold the cylinder while servicing.

·

Do not wear cotton gloves or other similar materials when handling the piston rod. Fibers may attach to the rod and result in gas leaks.

·

Do not push sideways on the cylinder because the rod may bend.



a.
B408716C01
0,0 0,0 false
V100155

Protective Tape


Using a thin-bladed screwdriver with its tip wrapped in protective tape, remove the 2 stop rings along their grooves.


b.

Detach the 2 ball joints and remove the back door stay assembly LH.

NOTICE:

Remove the back door stay assembly LH while supporting the back door by hand.



Hide 68948 2.REMOVE LOWER BACK DOOR DAMPER STAY BRACKET LH

a.
B408890

Remove the 2 bolts and lower back door damper stay bracket LH.


Hide 68946 3.REMOVE UPPER BACK DOOR DAMPER STAY BRACKET LH

a.
B408710

Remove the 2 bolts and upper back door damper stay bracket LH.