Home › Vehicle Interior › HEATING / AIR CONDITIONING › FRONT AIR CONDITIONING UNIT
RM33K0E _58 Vehicle Interior _043555 HEATING / AIR CONDITIONING _0219879 FRONT AIR CONDITIONING UNIT A

HEATING / AIR CONDITIONING  FRONT AIR CONDITIONING UNIT  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 88501 2.INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY

a.
E315766

Install the No. 1 cooler evaporator sub-assembly together with the No. 1 cooler thermistor to the upper heater case.


b.

Connect the connector clamp to the upper heater case.


c.

Attach the claw to install the upper heater case to the lower heater case.

E315765


d.

Install the 2 screws.


Hide 88515 3.INSTALL COOLER EXPANSION VALVE

a.
E315764

Sufficiently apply compressor oil to 2 new O-rings and the fitting surface of the No. 1 cooler evaporator sub-assembly.

Compressor Oil:

ND-OIL 8 or equivalent



b.

Install the 2 O-rings to the No. 1 cooler evaporator sub-assembly.

NOTICE:

Keep the O-rings and O-ring fitting surfaces free of foreign matter.



c.

Using a 4 mm hexagon socket wrench, install the cooler expansion valve with the 2 bolts.

Torque:
3.5 N*m (36 kgf*cm, 31 in.*lbf)


Hide 87107A 4.INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY

a.
E319748C01
0,0 0,0 false
V113147

Install in this Direction


Install the heater radiator unit sub-assembly as shown in the illustration.


b.
E317417

Install the heater radiator cover with the 2 screws.


c.
E315761

Attach the claw to install the heater clamp.


d.
E317416

Install the packing.


Hide 87050C 5.INSTALL NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)

a.

Align each gear on the air conditioning radiator assembly side as shown in the illustration, and then check that the gears of the No. 1 air conditioning radiator damper servo sub-assembly are aligned as shown in the illustration.

E315768C01
1.177,1.344 1.365,0.833 1.365,0.833 1.594,0.833 true 1.823,1.771 2.01,1.26 2.01,1.26 2.24,1.26 true 5.427,1.146 5.115,0.969 5.115,0.969 4.938,0.969 true 6.052,0.667 5.708,0.354 5.708,0.354 5.531,0.354 true 1.646,0.729 1.958,0.885 0.313,0.156 10 true *a 2.292,1.188 2.604,1.344 0.313,0.156 10 true *a 4.76,0.865 5.073,1.021 0.313,0.156 10 false *a 5.354,0.25 5.667,0.406 0.313,0.156 10 false *a
*a Align as shown - -



b.
E319749

Install the No. 1 air conditioning radiator damper servo sub-assembly with the 3 screws.


Hide 55906A 6.INSTALL DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)

a.
E317548

Attach the arm of the defroster damper control cable sub-assembly to the link of the blower assembly as shown in the illustration.


b.

Attach the claw to install the defroster damper control cable sub-assembly.


Hide 55909A 7.INSTALL AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)

a.
E323312

Attach the arm of the air mix damper control cable sub-assembly to the link of the blower assembly as shown in the illustration.


b.

Attach the claw to install the air mix damper control cable sub-assembly.


Hide 88650N 8.INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY

a.
E320380

Install the air conditioning amplifier bracket with the 3 screws.


b.
E320384C01
0,0 0,0 false
V113147

Install in this Direction


for Automatic Air Conditioning System:

Install the air conditioning amplifier assembly with the bolt.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


c.
E320385C02
0,0 0,0 false
V113147

Install in this Direction


for Manual Air Conditioning System:

Install the air conditioning amplifier assembly with the bolt.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


Hide 82210K 9.INSTALL AIR CONDITIONING HARNESS ASSEMBLY (for Automatic Air Conditioning System)

a.

Attach the clamp to install the air conditioning harness assembly.


b.

Connect the 4 connectors.

E320376


Hide 88505 10.INSTALL AIR CONDITIONING DUCT SUB-ASSEMBLY (for Automatic Air Conditioning System)

a.
E320375

Attach the claw and clamp to install the air conditioning duct sub-assembly.


Hide 87130D 11.INSTALL BLOWER ASSEMBLY

Hide 87710G 12.INSTALL QUICK HEATER ASSEMBLY (w/ PTC Heater)

a.
E320386C01
0,0 0,0 false
V113147

Install in this Direction


Install the heater cover with the screw.


Hide 87114B 13.INSTALL HEATER COVER (w/o PTC Heater)

a.
E320386C01
0,0 0,0 false
V113147

Install in this Direction


Install the heater cover with the screw.