Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
87165C
1.REMOVE BLOWER MOTOR CONTROL (for Automatic Air Conditioning System)
Remove the 2 screws and blower motor control.
87138C
2.REMOVE BLOWER RESISTOR (for Manual Air Conditioning System)
Remove the 2 screws and blower resistor.
88548B
3.REMOVE AIR FILTER CASE
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
for Automatic Air Conditioning System:
Detach the claw and guide and remove the air filter case.
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
for Manual Air Conditioning System:
Detach the claw and guide and remove the air filter case.
87139D
4.REMOVE AIR REFINER ELEMENT
|
Remove in this Direction |
for Automatic Air Conditioning System:
Remove the air refiner element.
|
Remove in this Direction |
for Manual Air Conditioning System:
Remove the air refiner element.
87103B
5.REMOVE BLOWER WITH FAN MOTOR SUB-ASSEMBLY
for Automatic Air Conditioning System:
Remove the 3 screws and blower with fan motor sub-assembly.
for Manual Air Conditioning System
Remove the 3 screws and blower with fan motor sub-assembly.
87130K
6.REMOVE NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY
Remove the 2 screws and No. 1 blower damper servo sub-assembly.