84732H
1.INSPECT HEATER BLOWER SWITCH
| *a | Component with harness connected
(Heater Blower Switch) |
| *b | OFF |
| *c | LO |
| *d | M1 |
| *e | M2 |
| *f | HI |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 1 - 3 | LO | Below 1 Ω |
| 1 - 3
1 - 4 |
M1 | Below 1 Ω |
| 1 - 3
1 - 5 |
M2 | Below 1 Ω |
| 1 - 3
1 - 6 |
HI | Below 1 Ω |
If the result is not as specified, replace the heater blower switch.