1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
12601E
2.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
16361A
3.REMOVE FAN AND GENERATOR V BELT
88711
4.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE
for Type A:
Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the compressor assembly with magnet clutch.
Remove the O-ring from the No. 1 cooler refrigerant discharge hose.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
for Type B:
Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the compressor assembly with magnet clutch.
Remove the O-ring from the No. 1 cooler refrigerant discharge hose.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
88704
5.DISCONNECT SUCTION HOSE SUB-ASSEMBLY
for Type A:
Remove the bolt and disconnect the suction hose sub-assembly from the compressor assembly with magnet clutch.
Remove the O-ring from the suction hose sub-assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
for Type B:
Remove the bolt and disconnect the suction hose sub-assembly from the compressor assembly with magnet clutch.
Remove the O-ring from the suction hose sub-assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
6.REMOVE COMPRESSOR ASSEMBLY WITH MAGNET CLUTCH
for Type A:
Disconnect the connector.
Detach the clamp.
for Type B:
Disconnect the connector.
Detach the clamp.
for Type A:
Remove the 4 bolts compressor assembly with magnet clutch.
for Type B:
Remove the 4 bolts compressor assembly with magnet clutch.