Home › Vehicle Interior › HEATING / AIR CONDITIONING › HEATER SWITCH
RM33K0E _58 Vehicle Interior _043555 HEATING / AIR CONDITIONING _0219912 HEATER SWITCH G

HEATING / AIR CONDITIONING  HEATER SWITCH  INSPECTION  


PROCEDURE

Hide 84453 1.INSPECT IDLE UP SWITCH

a.
E166833C01
0.052,0.073 0.365,0.229 0.313,0.156 10 false *a
*a Component without harness connected
(Idle Up Switch)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
6 - 3 Idle up switch ON position Below 10 Ω
Idle up switch OFF position 10 kΩ or higher


If the result is not as specified, replace the idle up switch.


b.
E166833C01
0.052,0.073 0.365,0.229 0.313,0.156 10 false *a
*a Component without harness connected
(Idle Up Switch)


Check that the LED illuminates.

i.

Apply battery voltage to the heater switch assembly and check that the LED illuminates.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 5
Battery negative (-) → 4
Idle up switch illuminates


If the result is not as specified, replace the idle up switch.