Home › Engine / Hybrid System › 2TR-FE ENGINE CONTROL › ACCELERATOR PEDAL
RM33K0E _51 Engine / Hybrid System _043567 2TR-FE ENGINE CONTROL _0220947 ACCELERATOR PEDAL A

2TR-FE ENGINE CONTROL  ACCELERATOR PEDAL  REMOVAL  


PROCEDURE

Hide 78110K 1.REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

NOTICE:

This accelerator pedal does not require lubrication.

Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

If applied, the accelerator pedal sensor assembly must be replaced.


a.
A356167C01
0.052,0.042 0.365,0.198 0.313,0.156 10 false *A 0.083,2.302 0.396,2.458 0.313,0.156 10 false *B
*A for LHD
*B for RHD


Disconnect the accelerator pedal sensor connector.


b.

Remove the 2 nuts and accelerator pedal sensor assembly.

NOTICE:
·

Avoid physical shocks to the accelerator pedal sensor assembly.

·

Do not disassemble the accelerator pedal sensor assembly.