Home › Engine / Hybrid System › 2TR-FE ENGINE CONTROL › CRANKSHAFT POSITION SENSOR
RM33K0E _51 Engine / Hybrid System _043567 2TR-FE ENGINE CONTROL _0220956 CRANKSHAFT POSITION SENSOR G

2TR-FE ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  INSPECTION  


PROCEDURE

Hide 11301K 1.INSPECT CRANKSHAFT POSITION SENSOR

a.
A303769C01
0.938,1.094 1.458,1.094 false 1.938,1.083 2.458,1.083 false 0.604,1 0.99,1.229 0.385,0.229 10 false NE - 2.531,1.01 2.917,1.24 0.385,0.229 10 false NE 0.115,0.094 0.5,0.323 0.385,0.229 10 false *a
*a Component without harness connected
(Crankshaft Position Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (NE) - 2 (NE-) Cold 1630 to 2740 Ω
Hot 2065 to 3225 Ω


HINT:

In the table above, the terms "cold" and "hot" refer to the temperature of the crankshaft position sensor. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F).


If the result is not as specified, replace the crankshaft position sensor.