Home › Engine / Hybrid System › 1GD-FTV INTAKE / EXHAUST › INTERCOOLER
RM33K0E _51 Engine / Hybrid System _043577 1GD-FTV INTAKE / EXHAUST _0222059 INTERCOOLER A

1GD-FTV INTAKE / EXHAUST  INTERCOOLER  INSTALLATION  


PROCEDURE

Hide 1.INSTALL GROMMET

a.

Install the 2 grommets to the lower radiator support assembly.


Hide 17940D 2.INSTALL INTERCOOLER ASSEMBLY

a.

Attach the 2 grommets and connect the 2 guides to intercooler assembly.


b.

Install the intercooler assembly to the lower radiator support assembly with the 2 bolts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


Hide 53208A 3.CONNECT HOOD LOCK SUPPORT SUB-ASSEMBLY

a.

Connect the hood lock sub-assembly with the 3 bolts.

Torque:
12.5 N*m (127 kgf*cm, 9 ft.*lbf)

HINT:

Do not bend the hood lock cable.



b.

Attach the 5 wire harness clamps and connect the wire harness to the hood lock support sub-assembly.


c.

Connect the 3 connectors.


Hide 17362B 4.INSTALL NO. 2 AIR TUBE

a.
A347070C01
1.698,0.875 1.885,0.875 1.885,0.875 2.063,0.708 false 1.688,0.427 1.833,0.427 1.833,0.427 1.99,0.594 false 1.521,0.323 1.833,0.479 0.313,0.156 10 false *a 1.531,0.76 1.844,0.917 0.313,0.156 10 false *b 2.125,1.063 2.438,1.219 0.313,0.156 10 false *c
*a Protrusion
*b Embossed Mark
*c 0 to 2 mm (0 to 0.0787 in.)


Install the No. 2 air tube to the intercooler assembly with the 2 bolts.

NOTICE:

Before installation, remove any oil residue from the inside of the No. 2 air tube and intercooler assembly.


Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)

HINT:
·

Align the protrusion of the No. 2 air tube with the embossed mark of the intercooler assembly.

·

Position the hose clamps as shown in the illustration.

·

Position the hose so that the distance from the stopper is 0 to 2 mm (0 to 0.0787 in.).




b.

Tighten the hose clamp.

Torque:
6.5 N*m (66 kgf*cm, 58 in.*lbf)


c.

Attach 4 clamps and connect the oil return hose.


Hide 17361J 6.INSTALL NO. 1 AIR TUBE

a.

Install the No. 2 air hose to the No. 1 air tube with the hose clamp.

NOTICE:

Before installation, remove any oil residue from the inside of the No. 1 air tube and No. 2 air hose.



b.

Install the No. 1 air tube to the intercooler assembly with the 2 bolts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)

NOTICE:

Before installation, remove any oil residue from the inside of the intercooler assembly.



c.
A347069C01
0.99,2.792 1.302,2.948 0.313,0.156 10 false *a 0.688,3.167 1,3.323 0.313,0.156 10 false *c 3.115,0.719 3.427,0.875 0.313,0.156 10 false *a 3.01,0.229 3.323,0.385 0.313,0.156 10 false *c 2.667,0.115 2.979,0.271 0.313,0.156 10 false *b 0.469,2.323 0.802,2.479 0.333,0.156 10 false *b
*a Front Side
*b Upper Side
*c 90°


Tighten the 2 hose clamps.

Torque:
6.5 N*m (66 kgf*cm, 58 in.*lbf)

HINT:

Position the hose clamps as shown in the illustration.



Hide 53293C 8.INSTALL RADIATOR SIDE DEFLECTOR RH

Hide 53294C 9.INSTALL RADIATOR SIDE DEFLECTOR LH

Hide 52119A 10.INSTALL FRONT BUMPER COVER