Home › Engine / Hybrid System › 1GD-FTV INTAKE / EXHAUST › EXHAUST PIPE
RM33K0E _51 Engine / Hybrid System _043577 1GD-FTV INTAKE / EXHAUST _0222060 EXHAUST PIPE A

1GD-FTV INTAKE / EXHAUST  EXHAUST PIPE  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·
A356209

To prevent burns, do not touch the engine, exhaust pipe or other high temperature components while the engine is hot.

·

Wear protective gloves when removing the exhaust pipe assembly.

·

The exhaust pipe assembly is extremely hot immediately after the engine has stopped.

·

Confirm that the exhaust pipe assembly has cooled down before removing it.



PROCEDURE

Hide 17430 1.REMOVE TAILPIPE ASSEMBLY

a.

Remove the 2 bolts and 2 nuts.


b.

Disconnect the tailpipe assembly from the center exhaust pipe assembly and remove the gasket.


c.

Remove the tailpipe assembly from the exhaust pipe supports.


Hide 17420 2.REMOVE CENTER EXHAUST PIPE ASSEMBLY

a.

Remove the 2 bolts and 2 nuts.


b.

Disconnect the center exhaust pipe assembly from the front exhaust pipe assembly and remove the gasket.


c.

Remove the center exhaust pipe assembly from the 3 exhaust pipe supports.


Hide 17410 3.REMOVE FRONT EXHAUST PIPE ASSEMBLY

a.

Remove the 2 bolts and 2 compression springs.


b.

Disconnect the front exhaust pipe assembly from the exhaust manifold converter sub-assembly and remove the gasket.