Home › Vehicle Exterior › DOOR / HATCH › HOOD LOCK CONTROL CABLE ASSEMBLY(for LHD)
RM33K0E _59 Vehicle Exterior _043559 DOOR / HATCH _0222076 HOOD LOCK CONTROL CABLE ASSEMBLY(for LHD) A

DOOR / HATCH  HOOD LOCK CONTROL CABLE ASSEMBLY(for LHD)  INSTALLATION  


PROCEDURE

Hide 53630 1.INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY

a.
B277362C11
1.719,1.323 2.458,1.323 false 1.542,1.229 1.729,1.396 0.188,0.167 10 false *1
*1 String


Tie the string that was passed through the engine compartment to the end of the hood lock control cable assembly as shown in the illustration.

HINT:

Use a length of string long enough to pass through the engine compartment.



b.

Pass the hood lock control cable assembly through the vehicle body, and then attach the grommet and each clamp.


c.

Untie the string from the hood lock control cable assembly.

B438679C02
1.448,3.865 1.615,3.865 1.615,3.865 1.781,3.74 true 1.792,4.083 2.125,4.083 true 2.781,4 3.115,4 true 2.667,3.5 2.75,3.5 2.75,3.5 2.875,3.708 true 3.771,4.031 4.104,4.031 true 4.417,3.417 4.25,3.417 4.25,3.417 4.125,3.667 true 5.25,3.417 5.417,3.417 5.417,3.417 5.5,3.25 true 5.552,3.521 5.885,3.521 true 5.792,1.167 5.792,1.083 5.792,1.083 5.792,0.833 true 5.917,0.469 5.75,0.469 5.75,0.469 5.625,0.719 true 5.938,1.625 5.771,1.625 5.771,1.625 5.646,1.875 true 5.656,2.396 5.823,2.396 5.823,2.396 5.906,2.229 true 2.021,3.99 2.177,4.219 0.156,0.229 10 true *1 1.417,3.75 1.573,3.979 0.156,0.229 10 true *3 2.51,3.417 2.667,3.646 0.156,0.229 10 true *3 3.01,3.917 3.167,4.146 0.156,0.229 10 true *1 4.344,3.333 4.5,3.563 0.156,0.229 10 true *3 3.719,3.927 3.875,4.156 0.156,0.229 10 true *1 5.146,3.333 5.302,3.563 0.156,0.229 10 true *3 5.448,3.438 5.604,3.667 0.156,0.229 10 true *1 5.719,1.073 5.875,1.302 0.156,0.229 10 true *3 5.865,0.396 6.021,0.625 0.156,0.229 10 true *1 5.563,2.281 5.719,2.51 0.156,0.229 10 true *1 5.906,1.552 6.063,1.781 0.156,0.229 10 true *2
*1 Hood Lock Control Cable Assembly *2 Grommet
*3 Clamp - -



Hide 53601 2.INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

a.
B393838

Connect the hood lock control cable assembly to the hood lock control lever sub-assembly.


b.
B438678

Attach the claw to install the hood lock control lever sub-assembly.


Hide 53510 3.INSTALL HOOD LOCK ASSEMBLY

a.
B408955

Apply MP grease to the sliding parts of the hood lock assembly.


b.

Attach the clamp to connect the hood lock control cable assembly to the hood lock assembly.


c.
B438677C01
0,0 0,0 false
V100135

Bolt
V100136

Connector


Install the hood lock assembly with the 3 bolts.

Torque:
11 N*m (112 kgf*cm, 8 ft.*lbf)


d.

Connect the connector.


Hide 53117C 4.INSTALL NO. 1 RADIATOR GRILLE RETAINER