Home › Engine / Hybrid System › 1KD-FTV ENGINE CONTROL › DIESEL THROTTLE BODY
RM33K0E _51 Engine / Hybrid System _043566 1KD-FTV ENGINE CONTROL _0222114 DIESEL THROTTLE BODY A

1KD-FTV ENGINE CONTROL  DIESEL THROTTLE BODY  REMOVAL  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the diesel throttle body assembly removal/installation are shown below.

Replacement Part or Procedure Necessary Procedures Effects/Inoperative when not Performed Link
Replacement of diesel throttle body assembly Perform initialization - (Click here)

PROCEDURE

Hide 17940D 1.REMOVE INTERCOOLER ASSEMBLY

Hide 26100G 2.REMOVE DIESEL THROTTLE BODY ASSEMBLY

a.
A111790

Disconnect the diesel throttle body 2 connectors.


b.
A111832

Remove the 2 bolts, 2 nuts and the diesel throttle body assembly.


c.

Remove the gasket from the intake air connector.