Home › Engine / Hybrid System › 1KD-FTV ENGINE CONTROL › ACCELERATOR PEDAL
RM33K0E _51 Engine / Hybrid System _043566 1KD-FTV ENGINE CONTROL _0222116 ACCELERATOR PEDAL A

1KD-FTV ENGINE CONTROL  ACCELERATOR PEDAL  REMOVAL  


PROCEDURE

Hide 78120G 1.REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

NOTICE:
·

Avoid excessive force to the accelerator pedal sensor.

·

Do not disassemble the accelerator pedal sensor assembly.

·

This accelerator pedal does not require lubrication.

Do not apply oil or lubricant to the accelerator pedal sensor assembly.

If applied, the accelerator pedal sensor assembly must be replaced.



a.
A344408

Disconnect the accelerator pedal position sensor connector.


b.

Remove the 2 nuts and accelerator pedal sensor assembly.

NOTICE:
·

Avoid physical shocks to the accelerator pedal sensor assembly.

·

Do not disassemble the accelerator pedal sensor assembly.