Home › Brake › BRAKE SYSTEM (OTHER) › VACUUM WARNING SWITCH(for Diesel)
RM33K0E _54 Brake _043534 BRAKE SYSTEM (OTHER) _0223432 VACUUM WARNING SWITCH(for Diesel) G

BRAKE SYSTEM (OTHER)  VACUUM WARNING SWITCH(for Diesel)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT BRAKE FLUID LEVEL IN RESERVOIR

Hide 44610 2.INSPECT BRAKE BOOSTER ASSEMBLY

Hide 83390 3.INSPECT VACUUM WARNING SWITCH ASSEMBLY

a.

Start the engine and stop it after 1 or 2 minutes.


b.

Disconnect the connector from the vacuum warning switch assembly.


c.

Measure the resistance of the vacuum warning switch assembly.

Standard resistance:

10 kΩ or higher



d.

With the engine stopped, depress the brake pedal several times to release vacuum from the brake booster assembly, and measure the resistance of the vacuum warning switch assembly.

Standard resistance:

Below 1 Ω



e.

Connect the connector to the vacuum warning switch assembly.