Home › Brake › BRAKE (FRONT) › FRONT BRAKE
RM33K0E _54 Brake _043535 BRAKE (FRONT) _0223433 FRONT BRAKE A

BRAKE (FRONT)  FRONT BRAKE  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE CYLINDER BOOT

a.
C321912C01
1.958,0.771 1.604,0.292 1.604,0.292 1.396,0.292 true 1.177,0.208 1.354,0.385 0.177,0.177 10 false *a
*a Protective Tape


Using a screwdriver, remove the 4 set rings and 4 cylinder boots from the disc brake cylinder assembly LH.

HINT:

Tape the screwdriver tip before use.


NOTICE:

Be careful not to damage the front disc brake piston and disc brake cylinder assembly LH.



Hide 47731 2.REMOVE FRONT DISC BRAKE PISTON

a.
C111364C06
1.229,0.188 1.688,0.552 0.458,0.365 10 false *a 2.938,0.927 3.198,1.167 0.26,0.24 10 false *b 3.094,1.385 3.344,1.635 0.25,0.25 10 false *c
*a 170 mm (6.70 in.)
*b 50 mm (1.97 in.)
*c 25 mm (0.99 in.)


Prepare a wooden plate to hold the front disc brake pistons.


b.
C321913

Place the wooden plate between the front disc brake pistons and insert a front disc brake pad on one side.


c.

Apply compressed air to remove the 4 front disc brake pistons from the disc brake cylinder assembly LH.

CAUTION:

Do not place your finger in front of the front disc brake piston when using compressed air.


NOTICE:

Be careful not to spatter the brake fluid.



Hide 3.REMOVE PISTON SEAL

a.
C321914C01
2.031,0.729 1.604,0.177 1.604,0.177 1.365,0.177 true 1.167,0.083 1.344,0.26 0.177,0.177 10 false *a
*a Protective Tape


Using a screwdriver, remove the 4 piston seals from the disc brake cylinder assembly LH.

HINT:

Tape the screwdriver tip before use.


NOTICE:

Be careful not to damage the inner cylinder and piston seal groove.



Hide 31478B 4.REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP

Hide 47547B 5.REMOVE FRONT DISC BRAKE BLEEDER PLUG

a.

Remove the front disc brake bleeder plug from the disc brake cylinder assembly LH.