Home › Brake › BRAKE (REAR) › REAR BRAKE(for Rear Disc Brake)
RM33K0E _54 Brake _043536 BRAKE (REAR) _0223436 REAR BRAKE(for Rear Disc Brake) A

BRAKE (REAR)  REAR BRAKE(for Rear Disc Brake)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE REAR WHEEL

Hide 2.DRAIN BRAKE FLUID

NOTICE:

Wash off brake fluid immediately if it comes in contact with any painted surface.


Hide 47319F 3.DISCONNECT REAR FLEXIBLE HOSE LH

a.
C326920

Remove the union bolt and gasket from the rear disc brake cylinder assembly LH.

HINT:

Use a container to catch brake fluid as it drains out.



b.

Disconnect the rear flexible hose LH from the rear disc brake cylinder assembly LH.


Hide 47787A 4.REMOVE DUST BOOT PROTECTOR LH

a.
C326955

Remove the 2 bolts and dust boot protector LH from the rear disc brake cylinder assembly LH.


Hide 47850 5.REMOVE REAR DISC BRAKE CYLINDER ASSEMBLY LH

a.
C326921

Remove the 2 cylinder slide pins from the rear disc brake cylinder assembly LH.


b.

Remove the rear disc brake cylinder assembly LH from the rear disc brake cylinder mounting LH.


Hide 04466 6.REMOVE REAR DISC BRAKE PAD

a.

Remove the 2 rear disc brake pads together with the rear disc brake anti-squeal shims from the rear disc brake cylinder mounting LH.


Hide 04946 7.REMOVE REAR DISC BRAKE ANTI-SQUEAL SHIM

a.

Remove the 2 rear disc brake anti-squeal shims from the rear disc brake pads.


Hide 8.REMOVE REAR DISC BRAKE PAD WEAR INDICATOR PLATE

a.

Remove the rear disc brake pad wear indicator plate from the inner disc brake pad.


Hide 9.REMOVE REAR NO. 1 DISC BRAKE PAD SUPPORT PLATE

NOTICE:

If it is necessary to remove the pad support plates, replace them with new ones.


a.
C326940C02
1.625,0.677 1.25,0.875 1.25,0.875 0.979,0.875 true 1.49,1.531 1.219,1.396 1.219,1.396 0.771,1.396 false 2.021,0.635 2.677,0.635 true 1.875,1.656 2.385,1.656 true 0.5,1.323 0.708,1.521 0.208,0.198 10 false *1 0.771,0.802 0.948,0.969 0.177,0.167 10 false *2 2.417,1.583 2.594,1.75 0.177,0.167 10 true *2 2.708,0.563 2.906,0.74 0.198,0.177 10 true *1
*1 Rear No. 1 Disc Brake Pad Support Plate
*2 Rear No. 2 Disc Brake Pad Support Plate


Remove the 2 rear No. 1 disc brake pad support plates from the rear disc brake cylinder mounting LH.


Hide 10.REMOVE REAR NO. 2 DISC BRAKE PAD SUPPORT PLATE

NOTICE:

If it is necessary to remove the pad support plates, replace them with new ones.


a.

Remove the 2 rear No. 2 disc brake pad support plates from the rear disc brake cylinder mounting LH.


Hide 47722A 11.REMOVE REAR DISC BRAKE CYLINDER MOUNTING LH

a.
C326922

Remove the 2 bolts and rear disc brake cylinder mounting LH.


Hide 12.REMOVE REAR DISC BRAKE BUSH DUST BOOT

a.

Remove the rear disc brake bush dust boot from the rear disc brake cylinder mounting LH.


Hide 13.REMOVE REAR DISC BRAKE CYLINDER SLIDE BUSH

a.

Remove the rear disc brake cylinder slide bush from the rear disc brake cylinder mounting LH.


Hide 14.REMOVE REAR DISC BRAKE CYLINDER HOLE PLUG

a.

Remove the rear disc brake cylinder hole plug from the rear disc brake cylinder mounting LH.


Hide 42431 15.REMOVE REAR DISC

a.
C326923C01
1.917,0.896 2.927,0.896 2.927,0.896 1.948,0.979 true 2.979,0.813 3.188,0.99 0.208,0.177 10 false *a
*a Matchmark


Put matchmarks on the rear disc and axle hub if planning to reuse the disc.


b.
C326924C01
0,0 0,0 false
V113147

Shoe Adjuster Contracts


Turn the shoe adjuster until the disc turns freely, and then remove the disc.