Home › Brake › BRAKE (REAR) › REAR BRAKE(for Rear Disc Brake)
RM33K0E _54 Brake _043536 BRAKE (REAR) _0223436 REAR BRAKE(for Rear Disc Brake) A

BRAKE (REAR)  REAR BRAKE(for Rear Disc Brake)  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE CYLINDER BOOT

a.
C326925C01
2.104,1.479 2.313,1.354 2.313,1.354 2.604,1.354 false 2.656,1.281 2.844,1.448 0.188,0.167 10 false *a
*a Protective Tape


Using a screwdriver with its wrapped with protective tape, remove the cylinder boot from the rear disc brake cylinder assembly LH.

HINT:

Tape the screwdriver tip before use.


NOTICE:

Be careful not to damage the rear disc brake piston and rear disc brake cylinder assembly LH.



Hide 47731B 2.REMOVE REAR DISC BRAKE PISTON

a.
C326926C01
1.229,1.74 1.51,1.896 1.51,1.896 1.698,1.896 false 1.76,1.823 1.938,2 0.177,0.177 10 false *a
*a Cloth


Place a piece of cloth between the rear disc brake piston and rear disc brake cylinder assembly LH.


b.

Apply compressed air to remove the rear disc brake piston from the rear disc brake cylinder assembly LH.

CAUTION:

Do not place your fingers in front of the rear disc brake piston when using compressed air.


NOTICE:

Be careful not to spatter the brake fluid.



Hide 3.REMOVE PISTON SEAL

a.
C305014C03
1.75,1.156 2.135,1.865 2.135,1.865 2.396,1.865 true 2.458,1.792 2.771,1.948 0.313,0.156 10 false *a
*a Protective Tape


Using a screwdriver with its tip wrapped with protective tape, remove the piston seal from the rear disc brake cylinder assembly LH.

HINT:

Tape the screwdriver tip before use.


NOTICE:

Be careful not to damage the inner surface of the cylinder or piston seal groove.



Hide 31478C 4.REMOVE REAR DISC BRAKE BLEEDER PLUG CAP

Hide 47547C 5.REMOVE REAR DISC BRAKE BLEEDER PLUG

a.

Remove the rear disc brake bleeder plug from the rear disc brake cylinder assembly LH.