Home › Vehicle Exterior › HORN › HORN
RM33K0E _59 Vehicle Exterior _043563 HORN _0225217 HORN G

HORN  HORN  INSPECTION  


PROCEDURE

Hide 86510 1.INSPECT HIGH PITCHED HORN ASSEMBLY

B221681C17
0.094,0.073 0.458,0.417 0.365,0.344 10 false *a
*a Component without harness connected
(High Pitched Horn Assembly)


a.

Apply battery voltage and check the operation of the horn according to the table below.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Body ground
High pitched horn sounds


If the result is not as specified, replace the high pitched horn assembly.


Hide 86520 2.INSPECT LOW PITCHED HORN ASSEMBLY

B221681C18
0.094,0.094 0.458,0.438 0.365,0.344 10 false *a
*a Component without harness connected
(Low Pitched Horn Assembly)


a.

Apply battery voltage and check the operation of the horn according to the table below.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Body ground
Low pitched horn sounds


If the result is not as specified, replace the low pitched horn assembly.