Home › Engine / Hybrid System › 1GD-FTV EMISSION CONTROL › EXHAUST FUEL ADDITION INJECTOR
RM33K0E _51 Engine / Hybrid System _043574 1GD-FTV EMISSION CONTROL _0225244 EXHAUST FUEL ADDITION INJECTOR A

1GD-FTV EMISSION CONTROL  EXHAUST FUEL ADDITION INJECTOR  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
A343692

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


PROCEDURE

Hide 12601B 2.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 23811H 3.REMOVE NO. 1 FUEL PIPE

a.
A344471

Remove the bolt, union bolt and gasket and disconnect the No. 1 fuel pipe from the cylinder head cover sub-assembly and exhaust fuel addition injector assembly.


b.
A344472

Disconnect the No. 4 fuel pipe and remove the No. 1 fuel pipe.


Hide 16281 4.DISCONNECT NO. 4 WATER BY-PASS HOSE

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


a.
A344449

Slide the clamp and disconnect the No. 4 water by-pass hose from the No. 1 injector holder.


Hide 16282 5.DISCONNECT NO. 5 WATER BY-PASS HOSE

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


a.

Slide the clamp and disconnect the No. 5 water by-pass hose from the No. 1 injector holder.


Hide 23295D 6.REMOVE NO. 1 INJECTOR HOLDER

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


a.
A346671

Remove the connector from the exhaust fuel addition injector assembly.


b.
A346672

Remove the 3 nuts and No. 1 injector holder from the exhaust manifold.


Hide 17168 7.REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR

a.
A343917

Remove the 3 nuts and No. 2 exhaust manifold heat insulator from the No. 1 injector holder.


b.

Remove the gasket.


Hide 23295C 8.REMOVE INJECTOR HOLDER

a.
A343918

Remove the 2 bolts and injector holder from the No. 1 injector holder.


Hide 23695B 9.REMOVE NO. 2 NOZZLE HOLDER CLAMP

a.
A343919

Using a T40 "TORX" socket wrench, remove the bolt and No. 2 nozzle holder clamp from the No. 1 injector holder.


Hide 23710B 10.REMOVE EXHAUST FUEL ADDITION INJECTOR ASSEMBLY

a.
A343920

Remove the exhaust fuel addition injector assembly from the No. 1 injector holder.


b.
A343923

Remove the gasket from the No. 1 injector holder.


c.
A343921

Remove the E-ring from the exhaust fuel addition injector assembly.


d.
A343922

Remove the No. 3 fuel injector back-up ring, O-ring, No. 2 fuel injector back-up ring and No. 1 fuel injector back-up ring from the exhaust fuel addition injector assembly.